Commercial Display

Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

NEW

LED Continuous Supplement Light

Continuous light, high beam LED light source, 28 lamp beads
Aluminum alloy light body, fin-type radiator, and high light transmission with tempering glass
High beam LED chips with long lifespan, good stability and high luminous efficiency
Professional optical design, light uniformity and distinct target spot
High beam light design with built-in automatic light control, open at low illumination
Two grades of brightness control, adjust to different application conditions
Novelty design( small size, light weight), easy for installation and adjustment
Water and dust resistant (IP66)
Green environmental protection without harmful metal such as mercury and lead

View Less

Thông số sản phẩm

Available models:

DS-TL2002C(AC220V)

DS-TL2002C (220 VAC)

NEW

Specification
Resources
Accessories

Thông số sản phẩm

Supplement Light
Light TypeWhite light
LED Lamp Beads28
Angle of Light40°
Effective Distance 16 to 25 m
Response Time ≤ 20 us
Color Temperature2500 K to 3500 K
Service Life≥ 50000 Hours

Function
Day and Night Function Support ambient brightness detection, automatic start-up at low illumination (optional)
Brightness ControlTwo grades of brightness control
Remote Control Adopt remote start-up the supplement light via a control line

General
Power AC 220 V ± 20%, 47 to 63 Hz
MaterialDie-cast aluminum
Dimensions322 mm × 271 mm × 118 mm (12.7" × 10.7" × 4.6") (L × W × H)
Operating Condition-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 10% to 90% (non-condensing)
Mounting ModeSupports front-mounted installation (bracket rotation angle: -90° to 90°)
ConsumptionMax. 60 W, lower grade 30 W (Determined by control model)
Supplement Light Exception DetectionThe fault output port output high voltage (typically 5 V) (optional), when the light is turned on and the supplement light output current is too large or too small.

Approval
Protection IP65: IEC 60529: 1989+A1: 1999+A2: 2013

Supplement Light

Light Type

White light

LED Lamp Beads

Angle of Light

40°

Effective Distance

16 to 25 m

Response Time

≤ 20 us

Color Temperature

2500 K to 3500 K

Service Life

≥ 50000 Hours

Function

Day and Night Function

Support ambient brightness detection, automatic start-up at low illumination (optional)

Brightness Control

Two grades of brightness control

Remote Control

Adopt remote start-up the supplement light via a control line

General

Power

AC 220 V ± 20%, 47 to 63 Hz

Material

Die-cast aluminum

Dimensions

322 mm × 271 mm × 118 mm (12.7" × 10.7" × 4.6") (L × W × H)

Operating Condition

-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 10% to 90% (non-condensing)

Mounting Mode

Supports front-mounted installation (bracket rotation angle: -90° to 90°)

Consumption

Max. 60 W, lower grade 30 W (Determined by control model)

Supplement Light Exception Detection

The fault output port output high voltage (typically 5 V) (optional), when the light is turned on and the supplement light output current is too large or too small.

Approval

Protection

IP65: IEC 60529: 1989+A1: 1999+A2: 2013

Supplement Light

Light TypeWhite light
LED Lamp Beads28
Angle of Light40°
Effective Distance 16 to 25 m
Response Time ≤ 20 us
Color Temperature2500 K to 3500 K
Service Life≥ 50000 Hours

Function

Day and Night Function Support ambient brightness detection, automatic start-up at low illumination (optional)
Brightness ControlTwo grades of brightness control
Remote Control Adopt remote start-up the supplement light via a control line

General

Power AC 220 V ± 20%, 47 to 63 Hz
MaterialDie-cast aluminum
Dimensions322 mm × 271 mm × 118 mm (12.7" × 10.7" × 4.6") (L × W × H)
Operating Condition-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 10% to 90% (non-condensing)
Mounting ModeSupports front-mounted installation (bracket rotation angle: -90° to 90°)
ConsumptionMax. 60 W, lower grade 30 W (Determined by control model)
Supplement Light Exception DetectionThe fault output port output high voltage (typically 5 V) (optional), when the light is turned on and the supplement light output current is too large or too small.