8 Port Fast Ethernet Smart POE Switch

  • 8 × 100 Mbps PoE RJ45 ports, 1 × Gigabit network RJ45 port.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • Up to 300 m long-range transmission.
  • AF/AT camera can reach up to 300 m in extend mode.
View Less
View more

Available models:

DS-3E1309P-EI/M

Spezifikation

  • Allgemein
  • ShellMetal material, fan-free design
  • Nettogewicht0.4 kg (0.9 lb)
  • Bruttogewicht0.9 kg (2.0 lb)
  • Abmessungen (B × H × T)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
  • Betriebstemperatur0 °C to 40 °C (32 °F to 104 °F)
  • Lagertemperatur-40 °C to 85 °C (-40 °F to 185 °F)
  • Luftfeuchtigkeit im Betrieb5% to 95% (no condensation)
  • Relative Luftfeuchtigkeit5% to 95% (no condensation)
  • Spannungsversorgung48VDC, 1.35A
  • InstallationsmodusDesk-Mounted,Wall-Mounted
  • Max. Energieverbrauch65 W
  • Stromverbrauch im Leerlauf5 W
  • Surge Protection6 KV
  • Netzwerk Parameter
  • Häfen8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
  • MAC-Adresstabelle8 K
  • Schaltleistung5.6 Gbps
  • Paketweiterleitungsrate4.17 Mpps
  • Interner Cache4 Mbits
  • PoE-Netzteil
  • PoE-StandardIEEE 802.3af,IEEE 802.3at
  • PoE-Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE-PortPoE: Ports 1 to 8
  • Max. Port Power30 W
  • PoE-Power Budget60 W
  • Softwarefunktion
  • Große ReichweitePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Supports 802.1ab LLDP for peer device discovery.
  • PoE-WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
  • Genehmigung
  • EMVCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • SicherheitUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Spezifikation

Spezifikation
Allgemein
  • ShellMetal material, fan-free design
  • Nettogewicht0.4 kg (0.9 lb)
  • Bruttogewicht0.9 kg (2.0 lb)
  • Abmessungen (B × H × T)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
  • Betriebstemperatur0 °C to 40 °C (32 °F to 104 °F)
  • Lagertemperatur-40 °C to 85 °C (-40 °F to 185 °F)
  • Luftfeuchtigkeit im Betrieb5% to 95% (no condensation)
  • Relative Luftfeuchtigkeit5% to 95% (no condensation)
  • Spannungsversorgung48VDC, 1.35A
  • InstallationsmodusDesk-Mounted,Wall-Mounted
  • Max. Energieverbrauch65 W
  • Stromverbrauch im Leerlauf5 W
  • Surge Protection6 KV
Netzwerk Parameter
  • Häfen8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
  • MAC-Adresstabelle8 K
  • Schaltleistung5.6 Gbps
  • Paketweiterleitungsrate4.17 Mpps
  • Interner Cache4 Mbits
PoE-Netzteil
  • PoE-StandardIEEE 802.3af,IEEE 802.3at
  • PoE-Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE-PortPoE: Ports 1 to 8
  • Max. Port Power30 W
  • PoE-Power Budget60 W
Softwarefunktion
  • Große ReichweitePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Supports 802.1ab LLDP for peer device discovery.
  • PoE-WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
Genehmigung
  • EMVCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • SicherheitUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Firmware

Kompatibel mit:
DS-3E1309P-EI/M
For better user experience, we highly recommend you to update your device to the latest firmware asap.

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics and tailor our website’s content. For more information on cookie practices please refer to our cookie policy.

Kontakt
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro
back to top

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.