Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

DS-3E1510P-EI

NEW

8 Port Gigabit Smart POE Switch

8 × Gigabit PoE port,2 × Gigabit RJ45 port
Total PoE Power Budget 110W
Support 802.1Q VLAN
Support PoE watchdog to detect and restart the cameras that do not respond
Support STP/RSTP Loop prevention
Support cable detection to locate failure
Up to 300 m Long Range PoE Transmission
6KV Surge Protection

View Less

Available models:

DS-3E1510P-EI

Allgemein
Abmessungen (B × H × T)217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
Lagertemperatur-40 °C to 85 °C (-40 °F to 185 °F)
InstallationsmodusDesk-Mounted,Wall-Mounted
Bruttogewicht1.27 kg (2.8 lb)
Nettogewicht0.54 kg (1.19 lb)
Stromverbrauch im Leerlauf2.7 W
ShellMetal material
Betriebstemperatur0 °C to 40 °C (32 °F to 104 °F)
Luftfeuchtigkeit im Betrieb5% to 95% (no condensation)
Spannungsversorgung54VDC, 2.22A
Max. Energieverbrauch120 W
Relative Luftfeuchtigkeit5% to 95% (no condensation)
Surge Protection6 KV

Netzwerk Parameter
Häfen8 × Gigabit PoE port,2 × Gigabit RJ45 port
MAC-Adresstabelle4 K
Schaltleistung20 Gbps
Paketweiterleitungsrate14.88 Mpps
Interner Cache1.5 Mbits

PoE-Netzteil
PoE-StandardIEEE 802.3af,IEEE 802.3at
PoE-Power PinEnd-span: 1/2(-), 3/6(+)
PoE-PortPoE: Ports 1 to 8
Max. Port Power30 W
PoE-Power Budget110 W

Softwarefunktion
Große ReichweitePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE-WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 3 aggregation groups.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Genehmigung
EMVCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SicherheitCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Spezifikation

Allgemein

Abmessungen (B × H × T)

217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')

Lagertemperatur

-40 °C to 85 °C (-40 °F to 185 °F)

Installationsmodus

Desk-Mounted,Wall-Mounted

Bruttogewicht

1.27 kg (2.8 lb)

Nettogewicht

0.54 kg (1.19 lb)

Stromverbrauch im Leerlauf

2.7 W

Shell

Metal material

Betriebstemperatur

0 °C to 40 °C (32 °F to 104 °F)

Luftfeuchtigkeit im Betrieb

5% to 95% (no condensation)

Spannungsversorgung

54VDC, 2.22A

Max. Energieverbrauch

120 W

Relative Luftfeuchtigkeit

5% to 95% (no condensation)

Surge Protection

6 KV

Netzwerk Parameter

Häfen

8 × Gigabit PoE port,2 × Gigabit RJ45 port

MAC-Adresstabelle

4 K

Schaltleistung

20 Gbps

Paketweiterleitungsrate

14.88 Mpps

Interner Cache

1.5 Mbits

PoE-Netzteil

PoE-Standard

IEEE 802.3af,IEEE 802.3at

PoE-Power Pin

End-span: 1/2(-), 3/6(+)

PoE-Port

PoE: Ports 1 to 8

Max. Port Power

30 W

PoE-Power Budget

110 W

Softwarefunktion

Große Reichweite

Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE-Watchdog

Ports 1 to 8: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 3 aggregation groups.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Genehmigung

EMV

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)

Sicherheit

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemie

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Allgemein

Abmessungen (B × H × T)217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
Lagertemperatur-40 °C to 85 °C (-40 °F to 185 °F)
InstallationsmodusDesk-Mounted,Wall-Mounted
Bruttogewicht1.27 kg (2.8 lb)
Nettogewicht0.54 kg (1.19 lb)
Stromverbrauch im Leerlauf2.7 W
ShellMetal material
Betriebstemperatur0 °C to 40 °C (32 °F to 104 °F)
Luftfeuchtigkeit im Betrieb5% to 95% (no condensation)
Spannungsversorgung54VDC, 2.22A
Max. Energieverbrauch120 W
Relative Luftfeuchtigkeit5% to 95% (no condensation)
Surge Protection6 KV

Netzwerk Parameter

Häfen8 × Gigabit PoE port,2 × Gigabit RJ45 port
MAC-Adresstabelle4 K
Schaltleistung20 Gbps
Paketweiterleitungsrate14.88 Mpps
Interner Cache1.5 Mbits

PoE-Netzteil

PoE-StandardIEEE 802.3af,IEEE 802.3at
PoE-Power PinEnd-span: 1/2(-), 3/6(+)
PoE-PortPoE: Ports 1 to 8
Max. Port Power30 W
PoE-Power Budget110 W

Softwarefunktion

Große ReichweitePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE-WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 3 aggregation groups.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Genehmigung

EMVCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SicherheitCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)