Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

AE-MN7083(RJ45)

8-ch IP cameras connectable via PoE interfaces, and 8-ch IP cameras extendable via PoE switch.
Up to 5MP resolution of H.264/H.265 compression for each IP camera.( *Support this function since V5.6.4 )
Pluggable dummy HDD for HDD with up to 2 TB capacity.
User-friendly GUI providing easy and flexible operations.
Pluggable 4G module and Wi-Fi module providing flexible data transmission solutions.
Built-in GPS module precisely positioning the vehicle via the satellite and recording the location information in the video stream.
Information collection interfaces collecting driving information such as left/right turn, braking, reversing, etc.
Specialized aviation connectors ensuring signal stability.
Shutdown delay (0 h to 6 h) and 24-hour scheduled startup/shutdown.
Build-in super-capacitor prevents the mobile NVR from damage caused by sudden power outage.
Wide-range power input (+9 VDC to +32 VDC).
Power-off protection prevents key data loss.
Aluminum die-cast chassis with no fan design well adaptable to working environment.
Software-based firewall supported.
Support accessing via WEB browser.
Support recording backup on redundant HDD/SSDs.

View Less

Available models:

AE-MN7083(RJ45)

AE-MN7083(1T/SSD)(RJ45)

Entrada vídeo/audio
Cámara IP8-ch connected via PoE interfaces and 8-ch extendable via PoE switch
Audio bidireccional1, integrated in EXT.DEV interface

Almacenamiento
HDD/SSD2 × 2.5 inch HDD/SSD, up to 2 TB for each HDD/SSD HDD/SSD data can be exported locally via this converter (optional) (A dummy HDD with 2 HDD/SSDs can be extended; Not for baseline. Note the SD card capacity when ordering)
Tarjeta SD1 × SD card, up to 256 GB（not for baseline. Note the SD card capacity when ordering）

General
Método de funcionamientoMouse, IR remote control, Web control, and touchscreen
Fuente de alimentación+9 to +32 VDC
ConsumoStandby: ≤ 0.5 W Full load: ≤ 75 W Note: Without peripheral and storage media ≤ 20 W
Temperatura de trabajo-10 °C to +60 °C (+14 °F to +140°F)
Condiciones de Humedad10% to 95%
Dimensiones (W × D × H)202 × 267.6 × 93.9 mm (7.95 × 10.54 × 3.7 inch)
Peso (sin medios de almacenamiento)3.13 kg (6.9 lb)
CertificaciónCE/FCC/Emark/EN50155/CB/EN45545/ROHS 2.0/ISO-7637-2

Posicionamiento
GNSS (Global Navigation Satellite System)GPS (Global Positioning System) & GLONASS (Global Navigation Satellite System), 1 ×FAKRA antenna

Sensor G
Sensor GBuilt-in

Salida vídeo/audio
Salida de VídeoMain output: 1, integrated in EXT.DEV interface. VGA: 1
Salida de audio1, integrated in EXT.DEV interface

Parámetros de Codificación/Decodificación
Compresión de vídeoH.264/H.265
Resolución de codificaciónMain stream: 1080P/720P/WD1/4CIF Sub-stream: 720P/WD1/4CIF/2CIF/CIF
Frame RatePAL: 1 to 25 fps; NTSC: 1 to 30 fps
Compresión de audioG.711a/G.711u/G.722.1/G.726
Stream TypeVideo, video & audio
Audio Bitrate16 -64Kbps
Dual StreamSupported

Red inalámbrica
Marcación 3G/4G1 × 4G card slot, 1 ×FAKRA antenna 5G module(optional)
Wi-FiWI2.4G model: 1 × 2.4 G Wi-Fi SMA antenna, WI58 model: 2 × 5.8 G Wi-Fi SMA antenna(Optional. 802.11B/G/N and 802.11AC are selectable. 1 antenna is needed for 802.11B/G/N module. 2 antennas are needed for 802.11AC module.)

Interfaces
Interfaz de red● Front panel :1 ×10M/100M RJ45 ● Rear panel: 1 × 10M/100M RJ45 Note：The front and rear network ports are at same network segments
Puerto Serial2 × RS-232(harness is optional). 1 × RS-485. 1 × RS-485 (integrated in EXT.DEV interface)
Interfaz USBFront panel: 1 × USB 2.0 Rear panel: 1 × USB 2.0 (5-pin aviation connector)
Entrada de sensor4 high/low level signal inputs
Entrada de alarma4 high/low level signal inputs, 1 pulse signal input, 1 BUTTON input
Salida de alarma2 relay signal outputs

Especificación

Entrada vídeo/audio

Cámara IP

8-ch connected via PoE interfaces and 8-ch extendable via PoE switch

Audio bidireccional

1, integrated in EXT.DEV interface

Almacenamiento

HDD/SSD

2 × 2.5 inch HDD/SSD, up to 2 TB for each HDD/SSD HDD/SSD data can be exported locally via this converter (optional) (A dummy HDD with 2 HDD/SSDs can be extended; Not for baseline. Note the SD card capacity when ordering)

Tarjeta SD

1 × SD card, up to 256 GB（not for baseline. Note the SD card capacity when ordering）

General

Método de funcionamiento

Mouse, IR remote control, Web control, and touchscreen

Fuente de alimentación

+9 to +32 VDC

Consumo

Standby: ≤ 0.5 W Full load: ≤ 75 W Note: Without peripheral and storage media ≤ 20 W

Temperatura de trabajo

-10 °C to +60 °C (+14 °F to +140°F)

Condiciones de Humedad

10% to 95%

Dimensiones (W × D × H)

202 × 267.6 × 93.9 mm (7.95 × 10.54 × 3.7 inch)

Peso (sin medios de almacenamiento)

3.13 kg (6.9 lb)

Certificación

CE/FCC/Emark/EN50155/CB/EN45545/ROHS 2.0/ISO-7637-2

Posicionamiento

GNSS (Global Navigation Satellite System)

GPS (Global Positioning System) & GLONASS (Global Navigation Satellite System), 1 ×FAKRA antenna

Sensor G

Built-in

Salida vídeo/audio

Salida de Vídeo

Main output: 1, integrated in EXT.DEV interface. VGA: 1

Salida de audio

1, integrated in EXT.DEV interface

Parámetros de Codificación/Decodificación

Compresión de vídeo

H.264/H.265

Resolución de codificación

Main stream: 1080P/720P/WD1/4CIF Sub-stream: 720P/WD1/4CIF/2CIF/CIF

Frame Rate

PAL: 1 to 25 fps; NTSC: 1 to 30 fps

Compresión de audio

G.711a/G.711u/G.722.1/G.726

Stream Type

Video, video & audio

Audio Bitrate

16 -64Kbps

Dual Stream

Supported

Red inalámbrica

Marcación 3G/4G

1 × 4G card slot, 1 ×FAKRA antenna 5G module(optional)

Wi-Fi

WI2.4G model: 1 × 2.4 G Wi-Fi SMA antenna, WI58 model: 2 × 5.8 G Wi-Fi SMA antenna(Optional. 802.11B/G/N and 802.11AC are selectable. 1 antenna is needed for 802.11B/G/N module. 2 antennas are needed for 802.11AC module.)

Interfaces

Interfaz de red

● Front panel :1 ×10M/100M RJ45 ● Rear panel: 1 × 10M/100M RJ45 Note：The front and rear network ports are at same network segments

Puerto Serial

2 × RS-232(harness is optional). 1 × RS-485. 1 × RS-485 (integrated in EXT.DEV interface)

Interfaz USB

Front panel: 1 × USB 2.0 Rear panel: 1 × USB 2.0 (5-pin aviation connector)

Entrada de sensor

4 high/low level signal inputs

Entrada de alarma

4 high/low level signal inputs, 1 pulse signal input, 1 BUTTON input

Salida de alarma

2 relay signal outputs