Distributed Vibration Fiber-Optic Sensing Server 5KM Dual-Ch

  • Supports dual channel DAS vibration fiber.
  • Supports long-distance detection with a single-channel detection distance up to 5 km.
  • Supports simultaneous positioning and monitoring of multiple vibration points with high positioning accuracy of ± 5 m, frequency response range from 10 Hz to 5 kHz, and alarm response time ≤ 2 s.
  • Effectively monitors intrusion in different scenarios including climbing, crossing, and excavation, reports information including the alarm type, time, latitude and longitude, and alarm level, and processes alarm events.
  • Supports setting parameters for the scenario, sensitivity, and more with the integrated Hikvision algorithms.
  • Strong environmental adaptability. With passive and flexible characteristics, the fiber can be installed in various complex terrains, not restricted by power supply conditions. It can withstand harsh environments such as moisture, temperature variations, and is resistant to ammonia, chlorine, salt spray, acid rain, and more.
View Less
View more

Available models:

DS-QFV0502

Especificación

  • Basic Parameter
  • Tipo de fibraSingle mode (ITU-T G.652D)
  • Channel2
  • Single-Channel Detection Range5km
  • Positioning Accuracy5km:±5m
  • Frequency Response10Hz to 5kHz
  • Unit≤ 600 per channel
  • Alarm Response Time≤ 2s
  • Función
  • Activador de alarmaIntrusion alarm, Fiber cut alarm, Tampering alarm
  • Indicador LEDPower indicator: Solid blue: Device is connected to the power supply and powers on Blue light is not on: Device powers off Status indicator: Solid blue: Device works normally without any error Red light flashes slowly: Wired network error Solid red: Device error (including all-in-one model error, FPGA exception, HDD error, tampering alarm)
  • BuzzerStay buzzing for tampering alarm
  • SwitchRocker switch for power
  • Comunicación
  • Método de comunicaciónWired communication
  • Interfaz
  • Interfaz de fibra2 FC/APC fiber interfaces
  • Interfaz de energía1 power input interface with 100~240V AC power input
  • Function Interface1 1000 M network interface, 1 RS-232 interface, 1 RS-485 interface, 2 USB 3.0 interfaces, 1 3.5 mm audio interface
  • Salida de alarma1 relay output
  • General
  • MaterialMetal
  • alimentación100-240V~50/60Hz 1.4A
  • ColorBlack
  • Consumo de energía< 60 W
  • Condiciones de humedad0% to 93% (± 2%)
  • Laser Classification Class 1
  • Dimensión67 mm × 483 mm × 443.5 mm (2.63" × 19.02" × 17.46")
  • Dimensión del paquete186 mm x 600 mm x 580 mm (7.32" × 23.62" × 22.83")
  • Con peso del paqueteApprox. 10.5 kg (23.15 lb.)
  • Approx. 8.2 kg (18.08 lb.)
  • Lista de empaqueDevice × 1 Cable × 1 Fiber optic patch cord x 2 Flange dust cap x 2 Green terminal block connecter × 2
  • Temperatura de funcionamiento-15 °C to 55 °C (5 °F to 131 °F)

Especificación

Especificación
Basic Parameter
  • Tipo de fibraSingle mode (ITU-T G.652D)
  • Channel2
  • Single-Channel Detection Range5km
  • Positioning Accuracy5km:±5m
  • Frequency Response10Hz to 5kHz
  • Unit≤ 600 per channel
  • Alarm Response Time≤ 2s
Función
  • Activador de alarmaIntrusion alarm, Fiber cut alarm, Tampering alarm
  • Indicador LEDPower indicator: Solid blue: Device is connected to the power supply and powers on Blue light is not on: Device powers off Status indicator: Solid blue: Device works normally without any error Red light flashes slowly: Wired network error Solid red: Device error (including all-in-one model error, FPGA exception, HDD error, tampering alarm)
  • BuzzerStay buzzing for tampering alarm
  • SwitchRocker switch for power
Comunicación
  • Método de comunicaciónWired communication
Interfaz
  • Interfaz de fibra2 FC/APC fiber interfaces
  • Interfaz de energía1 power input interface with 100~240V AC power input
  • Function Interface1 1000 M network interface, 1 RS-232 interface, 1 RS-485 interface, 2 USB 3.0 interfaces, 1 3.5 mm audio interface
  • Salida de alarma1 relay output
General
  • MaterialMetal
  • alimentación100-240V~50/60Hz 1.4A
  • ColorBlack
  • Consumo de energía< 60 W
  • Condiciones de humedad0% to 93% (± 2%)
  • Laser Classification Class 1
  • Dimensión67 mm × 483 mm × 443.5 mm (2.63" × 19.02" × 17.46")
  • Dimensión del paquete186 mm x 600 mm x 580 mm (7.32" × 23.62" × 22.83")
  • Con peso del paqueteApprox. 10.5 kg (23.15 lb.)
  • Approx. 8.2 kg (18.08 lb.)
  • Lista de empaqueDevice × 1 Cable × 1 Fiber optic patch cord x 2 Flange dust cap x 2 Green terminal block connecter × 2
  • Temperatura de funcionamiento-15 °C to 55 °C (5 °F to 131 °F)

Resources

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Aplicado a:
DS-QFV0502

Este sitio web utiliza cookies para almacenar información en su dispositivo. Las cookies ayudan a que nuestro sitio web funcione normalmente y nos muestran cómo podemos mejorar su experiencia de usuario.

Al continuar navegando por el sitio, usted acepta nuestra política de cookies y nuestra política de privacidad.

Contáctenos
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.