*Images are for illustrative purposes. Actual product appearance and specifications may vary.

4 Port Gigabit Smart Managed Industrial Solar POE Switch

4 x Gigabit PoE Ports, 2 × Gigabit SFP
Support 802.3bt Hi-PoE, Max. 90 W for one port
Support 24 V passive PoE output for wireless bridge, etc.
Support 12 V to 24 V solar power input, DC 54 V input
Wider Temperature (-40 °C to 75 °C) Design
Support battery health monitoring via Hik-Partner Pro and Hik-Connect
Support power consumption schedule
6 kV Surge Protection

View Less

Verfügbare Modelle:

DS-3T1506HP-EI-UPS

Spezifikation
Ressourcen
Zubehör

Allgemein
Nettogewicht0.7 kg (1.54 lb)
Bruttogewicht1.16 kg (2.56 lb)
Abmessungen (B × H × T)158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'')
Betriebstemperatur-40 °C to 75 °C (-40 °F to 167 °F)
Lagertemperatur-40 °C to 85 °C (-40 °F to 185 °F)
Luftfeuchtigkeit im Betrieb5% to 95% (no condensation)
Relative Luftfeuchtigkeit5% to 95% (no condensation)
Spannungsversorgung12V DC, 10A or 24V DC, 5A; 54V 2.22A
InstallationsmodusDesk-Mounted,Rail,Wall-Mounted
Max. Energieverbrauch120 W
Stromverbrauch im Leerlauf2 W
Surge Protection6 kV
ShellMetal material, IP30

Netzwerk Parameter
Anschlüsse4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port
MAC-Adresstabelle2 K
SchaltleistungWhole-Device Performance: 14 Gbps Port Performance: 12 Gbps
PaketweiterleitungsrateWhole-Device Performance: 10.42 Mpps Port Performance: 8.93 Mpps
Interner Cache1 Mbits

PoE-Netzteil
PoE-StandardPort 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings
PoE-Power PinPort 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Port 2: End-span: 1/2(-), 3/6(+) Ports 3 to 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output
PoE-PortHi-PoE: Port 1 PoE: Ports 2 to 4
Max. Port PowerPort 1: 90 W Ports 2 to 4: 30 W
PoE-Power BudgetDC 54 V input: 110 W DC 12 V~24 V input: 60 W

Softwarefunktion
Große ReichweitePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 6: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE-WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s).
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
DDM (Digital Diagnostic Monitoring)Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.

Genehmigung
EMVCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
SicherheitCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Allgemein

Nettogewicht

0.7 kg (1.54 lb)

Bruttogewicht

1.16 kg (2.56 lb)

Abmessungen (B × H × T)

158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'')

Betriebstemperatur

-40 °C to 75 °C (-40 °F to 167 °F)

Lagertemperatur

-40 °C to 85 °C (-40 °F to 185 °F)

Luftfeuchtigkeit im Betrieb

5% to 95% (no condensation)

Relative Luftfeuchtigkeit

5% to 95% (no condensation)

Spannungsversorgung

12V DC, 10A or 24V DC, 5A; 54V 2.22A

Installationsmodus

Desk-Mounted,Rail,Wall-Mounted

Max. Energieverbrauch

120 W

Stromverbrauch im Leerlauf

Surge Protection

Shell

Metal material, IP30

Netzwerk Parameter

Anschlüsse

4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port

MAC-Adresstabelle

Schaltleistung

Whole-Device Performance: 14 Gbps Port Performance: 12 Gbps

Paketweiterleitungsrate

Whole-Device Performance: 10.42 Mpps Port Performance: 8.93 Mpps

Interner Cache

1 Mbits

PoE-Netzteil

PoE-Standard

Port 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings

PoE-Power Pin

Port 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Port 2: End-span: 1/2(-), 3/6(+) Ports 3 to 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output

PoE-Port

Hi-PoE: Port 1 PoE: Ports 2 to 4

Max. Port Power

Port 1: 90 W Ports 2 to 4: 30 W

PoE-Power Budget

DC 54 V input: 110 W DC 12 V~24 V input: 60 W

Softwarefunktion

Große Reichweite

Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 6: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE-Watchdog

Ports 1 to 4: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s).

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS.

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

DDM (Digital Diagnostic Monitoring)

Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.

Genehmigung

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)

Sicherheit

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemie

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Allgemein