16 Port Gigabit Smart POE Switch

  • 16 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.
  • PoE watchdog to auto detect and restart the cameras that do not respond.
  • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.
View Less
View more

Available models:



  • General
  • ShellMetal material
  • Net Weight2.735 kg (6.03 lb)
  • Gross Weight3.31 kg (7.30 lb)
  • Dimensions (W × H × D)440 mm × 44 mm × 220.8 mm (17.32” × 1.73” × 8.69”)
  • Operating Temperature0 °C to 45 °C (0 °F to 113 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100 to 240 VAC, 50/60 Hz, Max. 4 A
  • Installation ModeRack (equipped with mounting ears)
  • Max. Power Consumption250 W
  • Power Consumption in Idle25 W
  • Surge Protection6 KV surge protection for PoE ports.
  • Network Parameters
  • Portos16 × Gigabit PoE port,2 × Gigabit fiber optical port
  • MAC Address Table8 K
  • Switching Capacity56 Gbps
  • Packet Forwarding Rate41.66 Mpps
  • Internal Cache4.1 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(+), 3/6(-);
  • PoE PortPoE: Ports 1 to 16
  • Max. Port Power30 W
  • PoE Power Budget225 W
  • Software Function
  • Long RangePorts 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
  • VLANVLAN is used for network scale planning and network health improvement.