Portugal - PT
X
image

8 Port Fast Ethernet Smart POE Switch

  • 8 × 100 Mbps PoE RJ45 ports, 2 × gigabit network RJ45 ports
  • IEEE 802.3at/af/bt standard for PoE ports
  • Network topology management, and alarm push
  • 6 KV surge protection for PoE ports
  • Up to 300 m long-range transmission
  • AF/AT camera can reach up to 300 m in extend mode
View Less
View more
Data Sheet
Sales Inquiry

Available models:

DS-3E1310HP-EI
DS-3E1310HP-EI
Data Sheet

Specification

  • General
  • ShellMetal material, IP40
  • Net Weight0.550 kg (1.21 lb)
  • Gross Weight0.950 kg (2.09 lb)
  • Dimensions (W × H × D)217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
  • Operating Temperature0 °C to 40 °C (0 °F to 104 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply54 VDC, 2.22 A
  • Installation ModeDesk-Mounted,Wall-Mounted
  • Max. Power Consumption120 W
  • Power Consumption in Idle4 W
  • Surge Protection6 KV
  • Network Parameters
  • Portos8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
  • MAC Address Table16 K
  • Switching Capacity9.2 Gbps
  • Packet Forwarding Rate6.84 Mpps
  • Internal Cache4 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortHi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
  • Max. Port PowerPort 1 to 2：90 W Ports 3 to 8：30 W
  • PoE Power Budget110 W
  • Software Function
  • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • PoE WatchdogPorts 1  to 8: auto detect and restart the cameras that do not respond.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
  • Approval
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Specification

General
Shell
Metal material, IP40
Net Weight
0.550 kg (1.21 lb)
Gross Weight
0.950 kg (2.09 lb)
Dimensions (W × H × D)
217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
Operating Temperature
0 °C to 40 °C (0 °F to 104 °F)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Supply
54 VDC, 2.22 A
Installation Mode
Desk-Mounted,Wall-Mounted
Max. Power Consumption
120 W
Power Consumption in Idle
4 W
Surge Protection
6 KV
Network Parameters
Portos
8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
MAC Address Table
16 K
Switching Capacity
9.2 Gbps
Packet Forwarding Rate
6.84 Mpps
Internal Cache
4 Mbits
PoE Power Supply
PoE Standard
IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
Hi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
Max. Port Power
Port 1 to 2：90 W Ports 3 to 8：30 W
PoE Power Budget
110 W
Software Function
Long Range
Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
PoE Watchdog
Ports 1  to 8: auto detect and restart the cameras that do not respond.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System Maintenance
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
Approval
EMC
FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
Safety
UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
Chemistry
CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Specification
General
  • ShellMetal material, IP40
  • Net Weight0.550 kg (1.21 lb)
  • Gross Weight0.950 kg (2.09 lb)
  • Dimensions (W × H × D)217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
  • Operating Temperature0 °C to 40 °C (0 °F to 104 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply54 VDC, 2.22 A
  • Installation ModeDesk-Mounted,Wall-Mounted
  • Max. Power Consumption120 W
  • Power Consumption in Idle4 W
  • Surge Protection6 KV
Network Parameters
  • Portos8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
  • MAC Address Table16 K
  • Switching Capacity9.2 Gbps
  • Packet Forwarding Rate6.84 Mpps
  • Internal Cache4 Mbits
PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortHi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
  • Max. Port PowerPort 1 to 2：90 W Ports 3 to 8：30 W
  • PoE Power Budget110 W
Software Function
  • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • PoE WatchdogPorts 1  to 8: auto detect and restart the cameras that do not respond.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
Approval
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

Technical documents

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Firmware_V2.0.9_230829
Applied to:
DS-3E1310HP-EI

Este site usa cookies para armazenar informações em seu dispositivo. Os cookies ajudam nosso site a funcionar normalmente e nos mostram como podemos melhorar sua experiência de usuário.

Ao continuar a navegar na página, concorda com a nossa política de cookies e política de privacidad.

 

Gerir Cookies Rejeitar Aceitar
Aceitar
Rejeitar Gerir Cookies
Sales
Technical Support
Online Service
Newsletter
Where to Buy
Website Feedback
Contact Us
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Download
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.