Commercial Display

Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

Industrial Full Managed PoE Switch

2 × 1/10GBaseX SFP+ Port ,2 × 1000BaseX SFP Port, 8 × 802.3af/at PoE/PoE+ 10/100/1000BaseT Port, 2×RS485 port,and 1 × Management Serial CLI Port.
Support static routing, policy routing, rip, OSPF and other three-layer routing protocols.
Easy network management by web browser, CLI, Telnet, serial console.
IGMP snooping and GMRP for filtering multicast traffic.
Port‐based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning.
QoS (IEEE 802.1P/1Q and TOS/DiffServ) to increase determinism.
SNMPv1/v2c/v3 for different levels of network management.
Support IEEE 802.3af/at compliant PoE.
Each PoE port provides up to 30 W output power.
PoE management: PoE device detection, PoE power management
Dual redundant power inputs design for DC models
Die‐casting aluminum alloy housing
Fanless, ‐40 °C to 75 °C wide operating temperature range

View Less

Data Sheet

Available models:

DS-3T3512P-H

Specification
Resources
Accessories

Data Sheet

General
Net Weight1.15 kg (2.54 lb)
Gross Weight1.45kg (3.2 lb)
Dimension (W × H × D)79 mm × 150 mm × 130 mm (0.259" ×0.492" × 0.427")
Working Temperature-40°C to 75°C (-40°F to 167°F)
Storage Temperature-40°C to 85°C (-40°F to 185°F)
Working Humidity5% to 95% (no condensation)
Storage Humidity5% to 95% (no condensation)
Power Supply52-57 V DC, 5A Redundant dual inputs 48V~57V for PoE 52V~57V for PoE+
Max. Power Consumption145W(PoE 125W)
ShellMetal material, IP40

Network Parameters
MAC Address Table8 K
Ports8 × Gigabit PoE port,2 × Gigabit fiber optical port,2 × 10G fiber optical port,2 × RS485 port
Switching CapacityWhole-Device Performance: 40 Gbps Port Performance: 40 Gbps
Packet Forwarding RateWhole-Device Performance: 29.76 Mpps Port Performance: 29.76 Mpps

PoE Power Supply
PoE Power Pin2-pin Phoenix terminal ×2

Software Function
VLAN4K VLAN Port-based VLAN Mac-based VLAN Protocol-based VLAN Based on the VLAN of the IP subnet QinQ, Flexible QinQ VLAN Mapping Voice VLAN MVRP
ReliabilitySupport STP/RSTP/MSTP Support EAPS/MEAPS Support MRD-Ring Support ERPS Support VRRP Support BFD for OSPF Support BFD for OSPF
SecuritySupport user classification management and password protection. 802.1X Authentication/Centralized MAC Address Authentication Portal Authentication MAC address Authentication Guest VLAN RADIUS Authentication SSH 2.0 Port isolation Port security EAD DHCP Snooping, Prevent deception DHCP server Support dynamic ARP detection to prevent man-in-the-middle attacks and ARP denial of service. uRPF, Prevent IP source address spoofing to guard against viruses and attacks. IP/Port/MAC bind Support plaintext and MD5 ciphertext authentication for OSPF and RIPv2 messages. PKI(Public Key Infrastructure) Attack source tracing IP Source Guard DAI, ARP protection, DDOS protection Secure boot
MulticastIGMP Snooping v1/v2/v3,MLD Snooping v1/v2 IPv4 IGMP Snooping IPv6 MLD Snooping PIM Snooping MLD Proxy MVRP Multicast VLAN IGMP v1/v2/v3,MLD v1/v2 PIM-DM,PIM-SM,PIM-SSM MSDP,MSDP for IPv6 MBGP,MBGP for Ipv6
DHCPDHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Snooping option82/DHCP Relay option8
IPv6ND PMTU IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP Tunnel 6to4 tunnel ISATAP tunnel GRE tunnel
VirtualizationIntelligent and Elastic Architecture Support distributed device management, distributed link aggregation, distributed elastic routing. Support stacking through standard Ethernet interfaces Support local stacking and remote stacking Maximum stacking of 4 units
Forwarding Modestore-forward
Green Energy SavingAutomatic power down function for ports Port timing down function (Schedule job) EEE(802.3az) Standard for Energy Efficient Ethernet
ACL&QoSSupport packet filtering functions from L2 (Layer 2) to L4 (Layer 4), providing traffic classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, and VLAN. Time Range ACL Dual-directional ACL policy for inbound and outbound orientation. VLAN based ACL Support limiting the rate of receiving messages and sending messages on ports, with a minimum granularity of 8Kbps. Packets redirection Supports re-marking of 802.1p and DSCP priority for messages Supports Committed Access Rate (CAR) function Supports flexible queue scheduling algorithms, which can be set based on both port and queue, supporting SP, WRR, and SP+WRR modes
Layer 2 Ring Network ProtocolSTP/RSTP/MSTP SmartLink BPDU Protection RRPP, ERPS, recovery time ≤ 30ms MRP(IEC62439-2), recovery time ≤ 20ms
IP RoutingStatic route RIPv1/v2, RIPng OSPFv1/v2, OSPFv3 BGP4, BGP4+ for IPv6 Support equal cost route, policy-based routing (PBR) VRRP/VRRPv3 BFD FOR VRRP BFD FOR IPv4 BFD FOR IPv6
OpenFlowOpenFlow 1.3 Supported multiple controllers (EQUAL mode, primary and standby mode) Supported multi-table pipelining Support Group table Support Meter
MirroringSupport for traffic mirroring Support for N:4 port mirroring Support for local and remote port mirroring Support for ERSPAN
Management and MaintenanceXModem/FTP/TFTP load upgrade Support configuration via command line interface (CLI), Telnet, and console port. SNMPv1/v2/v3, WEB RMON (Remote Monitoring) Alarm, event, historical record iMC SmartMC Support syslog, hierarchical alarm, debugging information output. NTP Supported power alarm and temperature alarm Ping、Tracert VCT(Virtual Cable Test) DLDP LLDP Loopback-detection DDM(Digital Diagnostic Monitoring)
Port AggregationSupport GE port aggregation Support 10GE port aggregation Support static aggregation Support dynamic aggregation Support cross-device aggregation
MAC Address TableBlack hole mac-address Port MAC address learning maximum number
Port CharacteristicsSupport IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support storm suppression based on PPS Support storm suppression based on bps
Industrial ProtocolSupport for industrial protocols such as Profinet, Ethernet/IP, Modbus, etc. pass through.
Jumbo FrameJumbo Frame
MFFMFF(MAC-Forced Forwarding)

Approval
EMCCE-EMC/RCM (EN 55032: 2015+A11:2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1:2019, EN 50130-4:2011+A1:2014, EN 55035:2017+A11:2020); IC (ICES-003: Issue 28)
SafetyUL (UL 62368-1); CB (IEC 62368-1:2014); CE-LVD (EN 62368-1:2014+A11:2038)
ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2027)

General

Net Weight

1.15 kg (2.54 lb)

Gross Weight

1.45kg (3.2 lb)

Dimension (W × H × D)

79 mm × 150 mm × 130 mm (0.259" ×0.492" × 0.427")

Working Temperature

-40°C to 75°C (-40°F to 167°F)

Storage Temperature

-40°C to 85°C (-40°F to 185°F)

Working Humidity

5% to 95% (no condensation)

Storage Humidity

5% to 95% (no condensation)

Power Supply

52-57 V DC, 5A Redundant dual inputs 48V~57V for PoE 52V~57V for PoE+

Max. Power Consumption

145W(PoE 125W)

Shell

Metal material, IP40

Network Parameters

MAC Address Table

8 K

Ports

8 × Gigabit PoE port,2 × Gigabit fiber optical port,2 × 10G fiber optical port,2 × RS485 port

Switching Capacity

Whole-Device Performance: 40 Gbps Port Performance: 40 Gbps

Packet Forwarding Rate

Whole-Device Performance: 29.76 Mpps Port Performance: 29.76 Mpps

PoE Power Supply

PoE Power Pin

2-pin Phoenix terminal ×2

Software Function

VLAN

4K VLAN Port-based VLAN Mac-based VLAN Protocol-based VLAN Based on the VLAN of the IP subnet QinQ, Flexible QinQ VLAN Mapping Voice VLAN MVRP

Reliability

Support STP/RSTP/MSTP Support EAPS/MEAPS Support MRD-Ring Support ERPS Support VRRP Support BFD for OSPF Support BFD for OSPF

Security

Support user classification management and password protection. 802.1X Authentication/Centralized MAC Address Authentication Portal Authentication MAC address Authentication Guest VLAN RADIUS Authentication SSH 2.0 Port isolation Port security EAD DHCP Snooping, Prevent deception DHCP server Support dynamic ARP detection to prevent man-in-the-middle attacks and ARP denial of service. uRPF, Prevent IP source address spoofing to guard against viruses and attacks. IP/Port/MAC bind Support plaintext and MD5 ciphertext authentication for OSPF and RIPv2 messages. PKI(Public Key Infrastructure) Attack source tracing IP Source Guard DAI, ARP protection, DDOS protection Secure boot

Multicast

IGMP Snooping v1/v2/v3,MLD Snooping v1/v2 IPv4 IGMP Snooping IPv6 MLD Snooping PIM Snooping MLD Proxy MVRP Multicast VLAN IGMP v1/v2/v3,MLD v1/v2 PIM-DM,PIM-SM,PIM-SSM MSDP,MSDP for IPv6 MBGP,MBGP for Ipv6

DHCP

DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Snooping option82/DHCP Relay option8

IPv6

ND PMTU IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP Tunnel 6to4 tunnel ISATAP tunnel GRE tunnel

Virtualization

Intelligent and Elastic Architecture Support distributed device management, distributed link aggregation, distributed elastic routing. Support stacking through standard Ethernet interfaces Support local stacking and remote stacking Maximum stacking of 4 units

Forwarding Mode

store-forward

Green Energy Saving

Automatic power down function for ports Port timing down function (Schedule job) EEE(802.3az) Standard for Energy Efficient Ethernet

ACL&QoS

Support packet filtering functions from L2 (Layer 2) to L4 (Layer 4), providing traffic classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, and VLAN. Time Range ACL Dual-directional ACL policy for inbound and outbound orientation. VLAN based ACL Support limiting the rate of receiving messages and sending messages on ports, with a minimum granularity of 8Kbps. Packets redirection Supports re-marking of 802.1p and DSCP priority for messages Supports Committed Access Rate (CAR) function Supports flexible queue scheduling algorithms, which can be set based on both port and queue, supporting SP, WRR, and SP+WRR modes

Layer 2 Ring Network Protocol

STP/RSTP/MSTP SmartLink BPDU Protection RRPP, ERPS, recovery time ≤ 30ms MRP(IEC62439-2), recovery time ≤ 20ms

IP Routing

Static route RIPv1/v2, RIPng OSPFv1/v2, OSPFv3 BGP4, BGP4+ for IPv6 Support equal cost route, policy-based routing (PBR) VRRP/VRRPv3 BFD FOR VRRP BFD FOR IPv4 BFD FOR IPv6

OpenFlow

OpenFlow 1.3 Supported multiple controllers (EQUAL mode, primary and standby mode) Supported multi-table pipelining Support Group table Support Meter

Mirroring

Support for traffic mirroring Support for N:4 port mirroring Support for local and remote port mirroring Support for ERSPAN

Management and Maintenance

XModem/FTP/TFTP load upgrade Support configuration via command line interface (CLI), Telnet, and console port. SNMPv1/v2/v3, WEB RMON (Remote Monitoring) Alarm, event, historical record iMC SmartMC Support syslog, hierarchical alarm, debugging information output. NTP Supported power alarm and temperature alarm Ping、Tracert VCT(Virtual Cable Test) DLDP LLDP Loopback-detection DDM(Digital Diagnostic Monitoring)

Port Aggregation

Support GE port aggregation Support 10GE port aggregation Support static aggregation Support dynamic aggregation Support cross-device aggregation

MAC Address Table

Black hole mac-address Port MAC address learning maximum number

Port Characteristics

Support IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support storm suppression based on PPS Support storm suppression based on bps

Industrial Protocol

Support for industrial protocols such as Profinet, Ethernet/IP, Modbus, etc. pass through.

Jumbo Frame

MFF

MFF(MAC-Forced Forwarding)

Approval

EMC

CE-EMC/RCM (EN 55032: 2015+A11:2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1:2019, EN 50130-4:2011+A1:2014, EN 55035:2017+A11:2020); IC (ICES-003: Issue 28)

Safety

UL (UL 62368-1); CB (IEC 62368-1:2014); CE-LVD (EN 62368-1:2014+A11:2038)

Chemistry

CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2027)

General

Net Weight1.15 kg (2.54 lb)
Gross Weight1.45kg (3.2 lb)
Dimension (W × H × D)79 mm × 150 mm × 130 mm (0.259" ×0.492" × 0.427")
Working Temperature-40°C to 75°C (-40°F to 167°F)
Storage Temperature-40°C to 85°C (-40°F to 185°F)
Working Humidity5% to 95% (no condensation)
Storage Humidity5% to 95% (no condensation)
Power Supply52-57 V DC, 5A Redundant dual inputs 48V~57V for PoE 52V~57V for PoE+
Max. Power Consumption145W(PoE 125W)
ShellMetal material, IP40

Network Parameters

MAC Address Table8 K
Ports8 × Gigabit PoE port,2 × Gigabit fiber optical port,2 × 10G fiber optical port,2 × RS485 port
Switching CapacityWhole-Device Performance: 40 Gbps Port Performance: 40 Gbps
Packet Forwarding RateWhole-Device Performance: 29.76 Mpps Port Performance: 29.76 Mpps

PoE Power Supply

PoE Power Pin2-pin Phoenix terminal ×2

Software Function

VLAN4K VLAN Port-based VLAN Mac-based VLAN Protocol-based VLAN Based on the VLAN of the IP subnet QinQ, Flexible QinQ VLAN Mapping Voice VLAN MVRP
ReliabilitySupport STP/RSTP/MSTP Support EAPS/MEAPS Support MRD-Ring Support ERPS Support VRRP Support BFD for OSPF Support BFD for OSPF
SecuritySupport user classification management and password protection. 802.1X Authentication/Centralized MAC Address Authentication Portal Authentication MAC address Authentication Guest VLAN RADIUS Authentication SSH 2.0 Port isolation Port security EAD DHCP Snooping, Prevent deception DHCP server Support dynamic ARP detection to prevent man-in-the-middle attacks and ARP denial of service. uRPF, Prevent IP source address spoofing to guard against viruses and attacks. IP/Port/MAC bind Support plaintext and MD5 ciphertext authentication for OSPF and RIPv2 messages. PKI(Public Key Infrastructure) Attack source tracing IP Source Guard DAI, ARP protection, DDOS protection Secure boot
MulticastIGMP Snooping v1/v2/v3,MLD Snooping v1/v2 IPv4 IGMP Snooping IPv6 MLD Snooping PIM Snooping MLD Proxy MVRP Multicast VLAN IGMP v1/v2/v3,MLD v1/v2 PIM-DM,PIM-SM,PIM-SSM MSDP,MSDP for IPv6 MBGP,MBGP for Ipv6
DHCPDHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Snooping option82/DHCP Relay option8
IPv6ND PMTU IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP Tunnel 6to4 tunnel ISATAP tunnel GRE tunnel
VirtualizationIntelligent and Elastic Architecture Support distributed device management, distributed link aggregation, distributed elastic routing. Support stacking through standard Ethernet interfaces Support local stacking and remote stacking Maximum stacking of 4 units
Forwarding Modestore-forward
Green Energy SavingAutomatic power down function for ports Port timing down function (Schedule job) EEE(802.3az) Standard for Energy Efficient Ethernet
ACL&QoSSupport packet filtering functions from L2 (Layer 2) to L4 (Layer 4), providing traffic classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, and VLAN. Time Range ACL Dual-directional ACL policy for inbound and outbound orientation. VLAN based ACL Support limiting the rate of receiving messages and sending messages on ports, with a minimum granularity of 8Kbps. Packets redirection Supports re-marking of 802.1p and DSCP priority for messages Supports Committed Access Rate (CAR) function Supports flexible queue scheduling algorithms, which can be set based on both port and queue, supporting SP, WRR, and SP+WRR modes
Layer 2 Ring Network ProtocolSTP/RSTP/MSTP SmartLink BPDU Protection RRPP, ERPS, recovery time ≤ 30ms MRP(IEC62439-2), recovery time ≤ 20ms
IP RoutingStatic route RIPv1/v2, RIPng OSPFv1/v2, OSPFv3 BGP4, BGP4+ for IPv6 Support equal cost route, policy-based routing (PBR) VRRP/VRRPv3 BFD FOR VRRP BFD FOR IPv4 BFD FOR IPv6
OpenFlowOpenFlow 1.3 Supported multiple controllers (EQUAL mode, primary and standby mode) Supported multi-table pipelining Support Group table Support Meter
MirroringSupport for traffic mirroring Support for N:4 port mirroring Support for local and remote port mirroring Support for ERSPAN
Management and MaintenanceXModem/FTP/TFTP load upgrade Support configuration via command line interface (CLI), Telnet, and console port. SNMPv1/v2/v3, WEB RMON (Remote Monitoring) Alarm, event, historical record iMC SmartMC Support syslog, hierarchical alarm, debugging information output. NTP Supported power alarm and temperature alarm Ping、Tracert VCT(Virtual Cable Test) DLDP LLDP Loopback-detection DDM(Digital Diagnostic Monitoring)
Port AggregationSupport GE port aggregation Support 10GE port aggregation Support static aggregation Support dynamic aggregation Support cross-device aggregation
MAC Address TableBlack hole mac-address Port MAC address learning maximum number
Port CharacteristicsSupport IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support storm suppression based on PPS Support storm suppression based on bps
Industrial ProtocolSupport for industrial protocols such as Profinet, Ethernet/IP, Modbus, etc. pass through.
Jumbo FrameJumbo Frame
MFFMFF(MAC-Forced Forwarding)

Approval

EMCCE-EMC/RCM (EN 55032: 2015+A11:2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1:2019, EN 50130-4:2011+A1:2014, EN 55035:2017+A11:2020); IC (ICES-003: Issue 28)
SafetyUL (UL 62368-1); CB (IEC 62368-1:2014); CE-LVD (EN 62368-1:2014+A11:2038)
ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2027)