Skip to content
NEW
add compare icon

Fire Detection Camera

  • New fusion smart camera, which can sense the temperature for alarm and can be rechecked via video
  • 400W Fixed Focus Intelligent Camera
  • Equipped with high-brightness four-color indicator lights to display the running, fault and alarm status
  • Supports flame detection, coverage: 30 meters (burning object: n-heptane, 0.1㎡ fire plate)
  • Supports high-temperature and temperature-rise exception detection
  • Supports local alarm indicator light, high-decibel alarm through an internal speaker, and remote muting
  • 1 internal speaker, 1 internal microphone, supports bidirectional voice intercom
  • OSD alarm event overlay support
  • Supports access to Hik-Protect or Hik-Connect APP
  • Supports IR fill light,with maximum range up to 30 meters
  • Supports DC 12~24V (±15%) or PoE power supply, with simple wiring
  • Supports 1 channel of alarm input and 3 channels of alarm output
  • IP67 dust and water resistant
View Less
View more

Available models:

HF-VT342(1mm)
View more View Less

Specification

  • Camera
  • Sensor Type 1/2.9" Progressive Scan CMOS
  • Main Stream 30 fps (2560*1440,1920 × 1080, 1280 × 720)
  • Max. Resolution 2560*1440
  • Sub Stream 30 fps (704 × 576, 640 × 480,352 × 288)30
  • Min. Illumination Color : 0.01 Lux @(F1.6,AGC ON)
  • Lens Horizontal: 78°, Vertical: 40°, Diagonal: 93°
  • Image Settings Saturation, brightness, contrast, sharpness, AGC and white balance can be adjusted through the client or browser.
  • WDR Digital WDR
  • Shutter 1/25 ~ 1/100,000 s
  • Image Enhancement Backlight compensation, 3D digital noise reduction, Grayscale range adjustment
  • Main Stream Video Compression Standard Smart265,Smart264,H.265,H.264
  • Sub Stream Compression Standard Smart265,Smart264,H.265,H.264
  • Video Bitrate 256Kbps ~ 8192Kbps
  • Intelligent Alarm Smoke alarm, Fire alarm
  • Protocol TCP/IP, HTTP, HTTPS, DHCP, DNS, RTP, RTSP, RTCP, NTP, IPv4, UDP
  • Interface Protocol ONVIF(PROFILE S, PROFILE G), ISAPI,EZVIZ,ISUP,SDK, GB28181
  • General One-click restoration,Anti flicker, Heartbeat,Mirroring,Password protection, Video occlusion,IP address filtering
  • Storage Micro SD/SDHC/SDXC card (Maximum support 512 GB)
  • Exception Detection Motion detection, Obstruction alarm, Hard disk full, Hard disk error, Network disconnection, IP address conflict, Illegal access, Peripheral failure
  • WEB Configuration Support web preview, configuration and parameter import/export
  • IR Range IR:30m
  • Detector
  • Image Sensor Vanadium Oxide (VOx) Microbolometer
  • Pixel Size 120 ×90
  • Response Waveband 8~14 μm
  • Focal Length of Thermal Imaging Lens 1.2 mm
  • Thermal Imaging Field of View 90° ×68°
  • Palette Mode Support 15 modes including white hot, black hot, fusion 1, rainbow, fusion 2, iron red 1, iron red 2, etc.
  • Fire and Smoke Detection Yes
  • Temperature Exception Detection Yes
  • Temperature Measurement Range -20 °C~400 °C
  • Thermography Precision ±8 °C or ±8% of the reading (take the maximum value) (within a distance of 0.3 to 1.5 meters from the device)
  • Noise Equivalent Temperature Difference (NETD) ≤50 mK(@25 °C,F1.0)
  • Temperature Sensing Mode Support non-contact temperature sensing
  • High Temperature Alarm Yes
  • Interface
  • Alarm Interface 1 way alarm input (Alarm in), 3 ways alarm output (Alarm out)
  • Ethernet Interface RJ45 10 M/100 M adaptive Ethernet port × 1
  • Audio Interface 1 way built-in microphone, 1 way built-in speaker
  • Professional Intelligence (Deep Learning Algorithm)
  • Flame Detection Yes coverage: 30 meters (burning object: n-heptane, 0.1㎡ fire plate)
  • Smoke Detection Yes
  • General
  • Ingress Protection IP 67
  • Mounting Height Indoor: higher than 2.5 m Outdoor: higher than 3.5 m
  • Power Interface Type DC 12V round head power interface
  • Power DC 12V ~ DC 24V,10W MAX; PoE: 802.3af,CLASS 3 (The power adapter is not included; you will need to configure it yourself)
  • Working Temperature -20~60°C
  • Working Humidity <95% RH
  • Dimension (φ × H) 245.7 mm × 80 mm ×80 mm
  • Alarm Indicator Light Red: Alarm Green: Operation indicator light Yellow: Fault Blue: Communication status indicator light
  • Product Implementation Standard Q/HKD 054-2024
  • Power Consumption Max 10 W
  • 1.4kg (without packaging)
  • Installation Support for hanging and wall mounting

Specification

Resources

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics / show you targeted advertising / show you advertising on the basis of your location / tailor our website's content. For more information on cookie practices please refer to our cookie policy.

 

Contact Us
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.