Commercial Display

Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

NEW

Traffic Signal Controller

Modular design method，easy to install and maintain
Using controllable silicon to control the signal light，keeping the device stable
Using open, standard communication protocol, easy to extend
Equipped with display and control panel, which can real-time monitor and manually adjust the signal status
Auto-monitoring system for the communication modules and lights. It will automatically alert and react to any problems that arise
Equipped with independent yellow flash controller，enhancing the security；
Manually control the on and off of a channel/a light separately, which is convenient for wiring inspection during debugging and lamp status inspection during maintenance
Support online upgrades without interrupting the running of the scheme
Log level: debug, info, warning, error, fault

View Less

Available models:

DS-TSC300-44H/HK3

DS-TSC300-44H/HK3 ^NEW

Specification
Resources
Accessories

Function
Signal Control Board and Channel4 output board(s), supporting 44 channel(s)
Timing StrategySupporting 64 phases, 255 patterns, 64 plans, 255 Schemes(Adjustable on demand)
Signal Control Mode•Fixed Cycle: A preset time is given to each movement every cycle, Multiple phase/cycle parameters can be set in different time periods. •Full-Actuated: Real-time optimization of green light timing based on traffic data, such as lane flow, in all lanes at the intersection. •Semi-Actuated: Based on traffic data in certain lanes, such as flow, it provides real-time optimization of the green light duration for the main lanes and reduces the unnecessary green light duration for the secondary lanes. •Self-Adaptive: For congested intersection scenarios, calculate and optimize the cycle and phase durations based on historical traffic data of the all lanes to Improve the traffic efficiency. •Single-Point Optimization: According to historical and real-time traffic data, timing parameters are calculated in advance and adjusted in real time during running. •Coordinates Green wave: Consider the linkage of multiple intersections, set parameters such as phase difference, and ensure that vehicles in the main direction encounter green lights all the way. •Pedestrian Crossing: Adjust signal timing based on pedestrian in demand. •Special control: Light Disable, Yellow Flash and All red.
Control TypeLocal mode,web control,HCM control,manual key control,third-party platform control
Manual ControlAuto, Manual, Step-to-Step, Yellow Flash, All Red and Special Directional control
Web ConfigurationSupports web browser configuration, 3D interface display of the real-time status of the intersection
Time SynchronizationSupports NTP time synchronization, satellite time synchronization (GPS antenna installation required), manual time configuration, and third-party platform time synchronization
Countdown Timer AccessSelf-learning mode,Pulse countdown,National standard 2004/2014 mode

Network
Network ProtocolTCP/IP,HTTP,NTP, IPv4,802.1X,UDP
ClientHikCentral Master Lite,Hik-Central Master
Web BrowserChrome V61+,IE9 to IE11,Firefox V41+,Edge
APIconnect to the HCM through the OpenAPI，or connect the device throught NTCIP
SecurityPassword protection,Complicated password,802.1X authentication (EAP-PEAP, EAP-LEAP, EAP-MD5),IP address filter,Host authentication (MAC address),Security audit log,Basic and digest authentication for HTTP/HTTPS

Interface
Ethernet Interface 1 RJ45 10M/100M self-adaptive Ethernet interface
RS-4852 × RS-485 interface(s)
RS-2321 × RS-232 interface(s)
USB1 × USB 2.0
Alarm Supports 8-ch pedestrian button input(s)
Control Panel13 buttons: auto, manual, step-to-step, yellow flash, all red and special directional control buttons
Wireless Controller (Optional)5 buttons: Auto, manual, all red, yellow flash, and step-by-step control, or button customization
GPS (Optional)( Optional ) Support GPS Satellite Signal Real-time Timing

General
Power OutputAC 100 V to 240 V,50/60 Hz
Power InputAC 100 V to 240 V,50/60 Hz
Overall Power Consumption≤ 35 W (no load)
Signal Channel Consumption≤400W@AC220V;≤200W@AC110V
Insulation Resistance≥ 100 MΩ
Backup Power SupplySupports manual switching of main and backup power supply
Operating Condition-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 95% or less (non-condensing)
Storage Condition-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 95% or less (non-condensing)
Installation ModeFloor-standing
Net WeightApprox. 86.1 kg (189.82 lb.)
Gross WeightApprox. 93 kg (205.03 lb.)
Dimensions (Without Package)680 mm × 500 mm × 1081.8 mm (26.77" × 19.69" × 42.59") (L × W × H)
Dimensions (with Package)870 mm × 670 mm × 1270 mm (34.25" × 26.38" × 50.00") (L × W × H)
Cabinet MaterialSECC

Approval
EMCEN 50293:2012
SafetyEN IEC:62311-1:2021,EN IEC:62311-2:2021
EnvironmentCE-RoHS: 2011/65/EU
ProtectionIK10: IEC 62262:2002,IP54: IEC 60529-2013

Function

Signal Control Board and Channel

4 output board(s), supporting 44 channel(s)

Timing Strategy

Supporting 64 phases, 255 patterns, 64 plans, 255 Schemes(Adjustable on demand)

Signal Control Mode

•Fixed Cycle: A preset time is given to each movement every cycle, Multiple phase/cycle parameters can be set in different time periods. •Full-Actuated: Real-time optimization of green light timing based on traffic data, such as lane flow, in all lanes at the intersection. •Semi-Actuated: Based on traffic data in certain lanes, such as flow, it provides real-time optimization of the green light duration for the main lanes and reduces the unnecessary green light duration for the secondary lanes. •Self-Adaptive: For congested intersection scenarios, calculate and optimize the cycle and phase durations based on historical traffic data of the all lanes to Improve the traffic efficiency. •Single-Point Optimization: According to historical and real-time traffic data, timing parameters are calculated in advance and adjusted in real time during running. •Coordinates Green wave: Consider the linkage of multiple intersections, set parameters such as phase difference, and ensure that vehicles in the main direction encounter green lights all the way. •Pedestrian Crossing: Adjust signal timing based on pedestrian in demand. •Special control: Light Disable, Yellow Flash and All red.

Control Type

Local mode,web control,HCM control,manual key control,third-party platform control

Manual Control

Auto, Manual, Step-to-Step, Yellow Flash, All Red and Special Directional control

Web Configuration

Supports web browser configuration, 3D interface display of the real-time status of the intersection

Time Synchronization

Supports NTP time synchronization, satellite time synchronization (GPS antenna installation required), manual time configuration, and third-party platform time synchronization

Countdown Timer Access

Self-learning mode,Pulse countdown,National standard 2004/2014 mode

Network

Network Protocol

TCP/IP,HTTP,NTP, IPv4,802.1X,UDP

Client

HikCentral Master Lite,Hik-Central Master

Web Browser

Chrome V61+,IE9 to IE11,Firefox V41+,Edge

API

connect to the HCM through the OpenAPI，or connect the device throught NTCIP

Security

Password protection,Complicated password,802.1X authentication (EAP-PEAP, EAP-LEAP, EAP-MD5),IP address filter,Host authentication (MAC address),Security audit log,Basic and digest authentication for HTTP/HTTPS

Interface

Ethernet Interface

1 RJ45 10M/100M self-adaptive Ethernet interface

RS-485

2 × RS-485 interface(s)

RS-232

1 × RS-232 interface(s)

USB

1 × USB 2.0

Alarm

Supports 8-ch pedestrian button input(s)

Control Panel

13 buttons: auto, manual, step-to-step, yellow flash, all red and special directional control buttons

Wireless Controller (Optional)

5 buttons: Auto, manual, all red, yellow flash, and step-by-step control, or button customization

GPS (Optional)

( Optional ) Support GPS Satellite Signal Real-time Timing

General

Power Output

AC 100 V to 240 V,50/60 Hz

Power Input

AC 100 V to 240 V,50/60 Hz

Overall Power Consumption

≤ 35 W (no load)

Signal Channel Consumption

≤400W@AC220V;≤200W@AC110V

Insulation Resistance

≥ 100 MΩ

Backup Power Supply

Supports manual switching of main and backup power supply

Operating Condition

-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 95% or less (non-condensing)

Storage Condition

-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 95% or less (non-condensing)

Installation Mode

Floor-standing

Net Weight

Approx. 86.1 kg (189.82 lb.)

Gross Weight

Approx. 93 kg (205.03 lb.)

Dimensions (Without Package)

680 mm × 500 mm × 1081.8 mm (26.77" × 19.69" × 42.59") (L × W × H)

Dimensions (with Package)

870 mm × 670 mm × 1270 mm (34.25" × 26.38" × 50.00") (L × W × H)

Cabinet Material

SECC

Approval

EMC

EN 50293:2012

Safety

EN IEC:62311-1:2021,EN IEC:62311-2:2021

Environment

CE-RoHS: 2011/65/EU

Protection

IK10: IEC 62262:2002,IP54: IEC 60529-2013

Function

Signal Control Board and Channel4 output board(s), supporting 44 channel(s)
Timing StrategySupporting 64 phases, 255 patterns, 64 plans, 255 Schemes(Adjustable on demand)
Signal Control Mode•Fixed Cycle: A preset time is given to each movement every cycle, Multiple phase/cycle parameters can be set in different time periods. •Full-Actuated: Real-time optimization of green light timing based on traffic data, such as lane flow, in all lanes at the intersection. •Semi-Actuated: Based on traffic data in certain lanes, such as flow, it provides real-time optimization of the green light duration for the main lanes and reduces the unnecessary green light duration for the secondary lanes. •Self-Adaptive: For congested intersection scenarios, calculate and optimize the cycle and phase durations based on historical traffic data of the all lanes to Improve the traffic efficiency. •Single-Point Optimization: According to historical and real-time traffic data, timing parameters are calculated in advance and adjusted in real time during running. •Coordinates Green wave: Consider the linkage of multiple intersections, set parameters such as phase difference, and ensure that vehicles in the main direction encounter green lights all the way. •Pedestrian Crossing: Adjust signal timing based on pedestrian in demand. •Special control: Light Disable, Yellow Flash and All red.
Control TypeLocal mode,web control,HCM control,manual key control,third-party platform control
Manual ControlAuto, Manual, Step-to-Step, Yellow Flash, All Red and Special Directional control
Web ConfigurationSupports web browser configuration, 3D interface display of the real-time status of the intersection
Time SynchronizationSupports NTP time synchronization, satellite time synchronization (GPS antenna installation required), manual time configuration, and third-party platform time synchronization
Countdown Timer AccessSelf-learning mode,Pulse countdown,National standard 2004/2014 mode

Network

Network ProtocolTCP/IP,HTTP,NTP, IPv4,802.1X,UDP
ClientHikCentral Master Lite,Hik-Central Master
Web BrowserChrome V61+,IE9 to IE11,Firefox V41+,Edge
APIconnect to the HCM through the OpenAPI，or connect the device throught NTCIP
SecurityPassword protection,Complicated password,802.1X authentication (EAP-PEAP, EAP-LEAP, EAP-MD5),IP address filter,Host authentication (MAC address),Security audit log,Basic and digest authentication for HTTP/HTTPS

Interface

Ethernet Interface 1 RJ45 10M/100M self-adaptive Ethernet interface
RS-4852 × RS-485 interface(s)
RS-2321 × RS-232 interface(s)
USB1 × USB 2.0
Alarm Supports 8-ch pedestrian button input(s)
Control Panel13 buttons: auto, manual, step-to-step, yellow flash, all red and special directional control buttons
Wireless Controller (Optional)5 buttons: Auto, manual, all red, yellow flash, and step-by-step control, or button customization
GPS (Optional)( Optional ) Support GPS Satellite Signal Real-time Timing

General

Power OutputAC 100 V to 240 V,50/60 Hz
Power InputAC 100 V to 240 V,50/60 Hz
Overall Power Consumption≤ 35 W (no load)
Signal Channel Consumption≤400W@AC220V;≤200W@AC110V
Insulation Resistance≥ 100 MΩ
Backup Power SupplySupports manual switching of main and backup power supply
Operating Condition-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 95% or less (non-condensing)
Storage Condition-40 °C to 70 °C (-40 °F to 158 °F). Humidity: 95% or less (non-condensing)
Installation ModeFloor-standing
Net WeightApprox. 86.1 kg (189.82 lb.)
Gross WeightApprox. 93 kg (205.03 lb.)
Dimensions (Without Package)680 mm × 500 mm × 1081.8 mm (26.77" × 19.69" × 42.59") (L × W × H)
Dimensions (with Package)870 mm × 670 mm × 1270 mm (34.25" × 26.38" × 50.00") (L × W × H)
Cabinet MaterialSECC