Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

DS-3E1310P-SI

EOL

8 Port Fast Ethernet Smart POE Switch

8 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.
IEEE 802.3at/af standard for PoE ports.
Network topology management, alarm push, network health monitor.
6 KV surge protection for PoE ports.
AF/AT camera can reach up to 300 m in extend mode.

View Less

Available models:

DS-3E1310P-SI

Geral
Estrutura externaMetal material
Peso líquido1.72 kg (3.79 lb)
Peso bruto2.20 kg (4.85 lb)
Dimensões (L x A x P)266.00 mm × 44.50 mm × 220.80 mm (10.47'' × 1.75'' × 8.69'')
Temperatura de funcionamento0 °C to 45 °C (0 °F to 113 °F)
Temperatura de armazenamento-40 °C to 85 °C (-40 °F to 185 °F)
Umidade operacional5% to 95% (no condensation)
Umidade relativa5% to 95% (no condensation)
Fonte de alimentação100-240 VAC, 50/60 Hz, Max. 1.5 A
Modo de instalaçãoRack (equipped with mounting ears)
Consumo máximo de energia150 W
Consumo de energia em ociosidade5 W
Surge Protection6 KV

Network Parameters
Portas8 × 10/100 Mbps PoE port,2 × Gigabit combo
Tabela de endereços MAC16 K
Capacidade do switch9.2 Gbps
Taxa máxima de pacote6.84 Mpps
Cache interno4 Mbits

PoE Power Supply
Padrão de PoEIEEE 802.3af,IEEE 802.3at
Pin de alimentação PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Porta PoEPoE: Ports 1 to 8
Potência máxima da porta30 W
Potência de alimentação de PoE125 W

Software Function
Longo alcancePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

Aprovação
EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SegurançaUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Especificação

Geral

Estrutura externa

Metal material

Peso líquido

1.72 kg (3.79 lb)

Peso bruto

2.20 kg (4.85 lb)

Dimensões (L x A x P)

266.00 mm × 44.50 mm × 220.80 mm (10.47'' × 1.75'' × 8.69'')

Temperatura de funcionamento

0 °C to 45 °C (0 °F to 113 °F)

Temperatura de armazenamento

-40 °C to 85 °C (-40 °F to 185 °F)

Umidade operacional

5% to 95% (no condensation)

Umidade relativa

5% to 95% (no condensation)

Fonte de alimentação

100-240 VAC, 50/60 Hz, Max. 1.5 A

Modo de instalação

Rack (equipped with mounting ears)

Consumo máximo de energia

150 W

Consumo de energia em ociosidade

5 W

Surge Protection

6 KV

Network Parameters

Portas

8 × 10/100 Mbps PoE port,2 × Gigabit combo

Tabela de endereços MAC

16 K

Capacidade do switch

9.2 Gbps

Taxa máxima de pacote

6.84 Mpps

Cache interno

4 Mbits

PoE Power Supply

Padrão de PoE

IEEE 802.3af,IEEE 802.3at

Pin de alimentação PoE

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

Porta PoE

PoE: Ports 1 to 8

Potência máxima da porta

30 W

Potência de alimentação de PoE

125 W

Software Function

Longo alcance

Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 8: auto detect and restart the cameras that do not respond.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

Aprovação

EMC

FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)

Segurança

UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Química

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Geral

Estrutura externaMetal material
Peso líquido1.72 kg (3.79 lb)
Peso bruto2.20 kg (4.85 lb)
Dimensões (L x A x P)266.00 mm × 44.50 mm × 220.80 mm (10.47'' × 1.75'' × 8.69'')
Temperatura de funcionamento0 °C to 45 °C (0 °F to 113 °F)
Temperatura de armazenamento-40 °C to 85 °C (-40 °F to 185 °F)
Umidade operacional5% to 95% (no condensation)
Umidade relativa5% to 95% (no condensation)
Fonte de alimentação100-240 VAC, 50/60 Hz, Max. 1.5 A
Modo de instalaçãoRack (equipped with mounting ears)
Consumo máximo de energia150 W
Consumo de energia em ociosidade5 W
Surge Protection6 KV

Network Parameters

Portas8 × 10/100 Mbps PoE port,2 × Gigabit combo
Tabela de endereços MAC16 K
Capacidade do switch9.2 Gbps
Taxa máxima de pacote6.84 Mpps
Cache interno4 Mbits

PoE Power Supply

Padrão de PoEIEEE 802.3af,IEEE 802.3at
Pin de alimentação PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Porta PoEPoE: Ports 1 to 8
Potência máxima da porta30 W
Potência de alimentação de PoE125 W

Software Function

Longo alcancePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

Aprovação

EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SegurançaUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)