DS-3E1526P-SI

24 Port Gigabit Smart POE Switch

  • 24 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.
  • PoE watchdog to auto detect and restart the cameras that do not respond.
  • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

Specification
  • Network Parameters
  • Port Number24 × Gigabit PoE ports, and 2 × Gigabit fiber optical ports
  • Port TypeRJ45 port, full duplex, MDI/MDI-X adaptive
  • Working ModeStandard mode (default) Extend mode
  • StandardIEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
  • Forwarding ModeStore-and-forward switching
  • MAC Address Table8 K
  • Internal Cache4.1 Mbits
  • Switching Capacity52 Gbps
  • Packet Forwarding Rate36.688 Mpps
  • PoE Power Supply
  • PoE StandardIEEE 802.3af, IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(-), 3/6(+)
  • PoE PortPorts 1 to 24
  • Max. Port Power30 W
  • PoE Power Budget370 W
  • Software Function
  • Port ConfigurationPort rate configuration, flow control, and ports enabling
  • Device MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
  • Link AggregationStatic link aggregation supported
  • Long RangeUp to 300 m transmission
  • PoE ConfigurationPoE watchdog: Ports 1 to 24 auto detect and restart the cameras that do not respond. PoE enabling: Support
  • Storm Control Storm control of unknown unicast, multicast and broadcast
  • Port MirroringSupport
  • QoSWRR and SP scheduling and port priority
  • VLAN4094 VLANs
  • STPSTP and RSTP protocols
  • Port IsolationPorts in isolation group cannot communicate with each other.
  • LLDPLLDP protocol supported for port configuration, global configuration and neighbor discovery
  • Port Rate-LimitingRate-limiting for ingress and egress ports
  • SNMPSNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces
  • General
  • Dimension (W × H × D)440 mm × 221 mm × 44 mm (17.32” × 8.7” × 1.73”)
  • Storage Temperature-40°C to 85°C (-40°F to 185°F)
  • Gross Weight3.535 kg (7.79 lb)
  • Net Weight2.975 kg (6.56 lb)
  • Power Consumption in Idle30 W
  • ShellMetal material
  • Operating Temperature-10°C to 55°C (14°F to 131°F)
  • Operating Humidity5% to 95% (no condensation)
  • Power Supply100 to 240 VAC, 50/60 Hz, Max. 6.3 A
  • Max. Power Consumption400 W
  • Relative Humidity5% to 95% (no condensation)
  • Approval
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)
  • SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)
Specification
Trung tâm tải xuống
Firmware
Applied to:
DS-3E1526P-SI
*For better user experience, we highly recommend you to update your device to the latest firmware asap.

This website uses necessary cookies to enable the website to function well. We would like to use additional cookies to provide you the best experience on our website. For more information, please see our cookie policy.

Liên hệ với chúng tôi