DS-3E1310P-SI

8 Port Fast Ethernet Smart POE Switch

  • 8 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.

Specification
  • Network Parameters
  • Port Number8 × 10/100 Mbps PoE ports, and 2 × gigabit combos
  • Port TypeRJ45 port, full duplex, MDI/MDI-X adaptive
  • Working ModeStandard mode (default) Extend mode
  • StandardIEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
  • Forwarding ModeStore-and-forward switching
  • MAC Address Table16 K
  • Internal Cache4 Mbits
  • Switching Capacity5.6 Gbps
  • Packet Forwarding Rate4.1664 Mpps
  • PoE Power Supply
  • PoE StandardIEEE 802.3af, IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(-), 3/6(+) Mid-span: 4/5(+), 7/8(-) 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPorts 1 to 8
  • Max. Port Power30W
  • PoE Power Budget125 W
  • Software Function
  • Port ConfigurationPort rate configuration, slow control, and ports enabling
  • Device MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
  • Long RangeUp to 300 m transmission
  • PoE ConfigurationPoE watchdog: Ports 1 to 8 auto detect and restart the cameras that do not respond. PoE enabling: Support
  • Port MirroringSupport
  • QoSWRR and SP scheduling and port priority
  • VLAN4094 VLANs
  • STPSTP and RSTP protocols
  • Port IsolationPorts in isolation group cannot communicate with each other.
  • SNMPSNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces
  • General
  • Dimension (W × H × D)266 mm × 44.5 mm × 220.8 mm (10.47" × 1.75" × 8.69")
  • Storage Temperature-40°C to 85°C (-40°F to 185°F)
  • Gross Weight2.20 kg (4.85 lb)
  • Net Weight1.72 kg (3.79 lb)
  • Power Consumption in Idle5 W
  • ShellMetal material
  • Operating Temperature-10°C to 55°C (14°F to 131°F)
  • Operating Humidity5% to 95% (no condensation)
  • Power Supply100 VAC~240 VAC, 50/60 Hz, Max. 1.5 A
  • Max. Power Consumption150 W
  • Relative Humidity5% to 95% (no condensation)
  • Approval
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)
  • SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)
Specification
Firmware
Applied to:
DS-3E1310P-SI
*For better user experience, we highly recommend you to update your device to the latest firmware asap.

This website uses cookies to store info on your device. Cookies help our website work normally and show us how we can improve your user experience.
By continuing to browse the site you are agreeing to our cookie policy and privacy policy.

Bize Ulaşın