Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

ELG-150-48A

Industrial Power Supply Unit

150W single output power supply for industrial PoE switch
Input: 100-305 VAC/142-431 VDC
Output: 48 VDC, 3.13 A
IP65 rating protection
Wide operating temperature: -40℃ to +90℃ for outdoor use.

View Less

OUTPUT
DC VOLTAGE48V
CONSTANT CURRENT REGIONNote.2 24~48V
RATED CURRENT(forBETypeonly) 2.8A
RATED POWER100VAC~180VAC (ForAlltheTypes) 105W 200VAC~305VAC (ExceptforBEType) 150.2W (ForBETypeonly) 134.4W
RIPPLE & NOISE (max.) Note.3250mVp-p
VOLTAGE ADJ. RANGE AdjustableforA/AB-Typeonly(viathebuilt-inpotentiometer) 43.2~52.8V
CURRENT ADJ. RANGE AdjustableforA/AB-Typeonly(viathebuilt-inpotentiometer) 1.56~3.13A
VOLTAGE TOLERANCE Note.4 ±2.0%
LINE REGULATION±0.5%
LOAD REGULATION±0.5%
AUXILIARY DC OUTPUTNominal15V(deviation11.5~15.5V)@0.3AforBE-Typeonly
SETUP, RISE TIME Note.61600ms, 80ms/115VAC 500ms,100ms/230VAC
HOLD UP TIME (Typ.)10ms/115VAC, 230VAC
RATEDCURRENT 3.13A

INPUT
VOLTAGE RANGE Note.5100~ 305VAC 142~431VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE47~63Hz
POWER FACTORPF≧0.97/115 VAC, PF≧0.95/230 VAC, PF≧0.92/277 VAC@full load (Please refer to "POWER FACTOR(PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION THD<20%(@load≧50%/115 VC; @load≧60%/230 VAC; @load≧75%/277 VAC) (Please refer to“TOTAL HARMONIC DISTORTION(THD)”section)
EFFICIENCY (Typ.)90%
EFFICIENCY (Typ.)(forBETypeonly)88%
AC CURRENT 1.7 A/115 VAC 0.9 A/230 VAC 0.7 A/277 VAC
INRUSH CURRENT (Typ.) COLD START 65 A(twidth=550 μ s measured at 50% Ipeak) at 230 VAC ; Per NEMA 410
MAX .No. of PSUs on 16A CIRCUIT BREAKER 3 units (circuit breaker of type B)/ 6 units (circuit breaker of type C) at 230 VAC
LEAKAGE CURRENT<0.75 mA/277 VAC
NO LOAD / STANDBY POWER CONSUMPTION No load power consumption<0.5W for Blank/A/Dx/D2-Type Standby power consumption <0.5W for B/AB/DA-Type

PROTECTION
OVER CURRENT95~108% Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE54~62V Shut down output voltage, re-power on to recover
OVER TEMPERATUREShut down output voltage, re-power on to recover

ENVIRONMENT
WORKING TEMP.Tcase=-40~+90℃ (Please refer to“ OUTPUT LOAD vs TEMPERATURE”section)
MAX. CASE TEMP.Tcase=+90℃
WORKING HUMIDITY20~95% RH non-condensing
STORAGE TEMP., HUMIDITY-40~+80℃, 10~95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0~60℃)
VIBRATION10~500 Hz, 5G 12min./1cycle, period for 72min. each along X,Y,Z axes

SAFETY& EMC
SAFETY STANDARDSUL8750(type”HL”)(except for BE-type),CSA C22.2 No. 250.13-12; IEC/EN/AS/NZS 61347-1,IEC/EN/AS/NZS 61347-2-13 independent, EN62384,BIS IS15885(for 12/12B/12DA/24/24B/24DA/36A/42/42A/48A/54 only), EAC TP TC 004,GB19510.1, GB19510.14; IP65 or IP67; KC61347-1, KC61347-2-13 approved
DALI STANDARDS Compliance to IEC62386-101,102,207 for DA-Type only
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/ 500VDC / 25℃/ 70%RH
EMC EMISSIONCompliance to EN55015, EN61000-3-2 ClassC(@load ≧ 60%); EN61000-3-3; GB17743 , GB17625.1 , EAC TPTC020 ; KCKN15 ,KN61547
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ; EN61547 , light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV),EAC TP TC020 ; KC KN 15,KN 61547

OTHERS
MTBF899.8K hrs min. Telcordia SR-332 (Bellcore) 313.66 Khrs min.MIL-HDBK-217F(25℃)
DIMENSION 219*63-35.5mm (L*W*H)
PACKING 0.95Kg ; 16pcs/16.0kg/0.77CUFT

Specification

OUTPUT

DC VOLTAGE

48V

CONSTANT CURRENT REGIONNote.2

24~48V

RATED CURRENT(forBETypeonly)

2.8A

RATED POWER

100VAC~180VAC (ForAlltheTypes) 105W 200VAC~305VAC (ExceptforBEType) 150.2W (ForBETypeonly) 134.4W

RIPPLE & NOISE (max.) Note.3

250mVp-p

VOLTAGE ADJ. RANGE

AdjustableforA/AB-Typeonly(viathebuilt-inpotentiometer) 43.2~52.8V

CURRENT ADJ. RANGE

AdjustableforA/AB-Typeonly(viathebuilt-inpotentiometer) 1.56~3.13A

VOLTAGE TOLERANCE Note.4

±2.0%

LINE REGULATION

±0.5%

LOAD REGULATION

±0.5%

AUXILIARY DC OUTPUT

Nominal15V(deviation11.5~15.5V)@0.3AforBE-Typeonly

SETUP, RISE TIME Note.6

1600ms, 80ms/115VAC 500ms,100ms/230VAC

HOLD UP TIME (Typ.)

10ms/115VAC, 230VAC

RATEDCURRENT

3.13A

INPUT

VOLTAGE RANGE Note.5

100~ 305VAC 142~431VDC (Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47~63Hz

POWER FACTOR

PF≧0.97/115 VAC, PF≧0.95/230 VAC, PF≧0.92/277 VAC@full load (Please refer to "POWER FACTOR(PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD<20%(@load≧50%/115 VC; @load≧60%/230 VAC; @load≧75%/277 VAC) (Please refer to“TOTAL HARMONIC DISTORTION(THD)”section)

EFFICIENCY (Typ.)

90%

EFFICIENCY (Typ.)(forBETypeonly)

88%

AC CURRENT

1.7 A/115 VAC 0.9 A/230 VAC 0.7 A/277 VAC

INRUSH CURRENT (Typ.)

COLD START 65 A(twidth=550 μ s measured at 50% Ipeak) at 230 VAC ; Per NEMA 410

MAX .No. of PSUs on 16A CIRCUIT BREAKER

3 units (circuit breaker of type B)/ 6 units (circuit breaker of type C) at 230 VAC

LEAKAGE CURRENT

<0.75 mA/277 VAC

NO LOAD / STANDBY POWER CONSUMPTION

No load power consumption<0.5W for Blank/A/Dx/D2-Type Standby power consumption <0.5W for B/AB/DA-Type

PROTECTION

OVER CURRENT

95~108% Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

54~62V Shut down output voltage, re-power on to recover

OVER TEMPERATURE

Shut down output voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.

Tcase=-40~+90℃ (Please refer to“ OUTPUT LOAD vs TEMPERATURE”section)

MAX. CASE TEMP.

Tcase=+90℃

WORKING HUMIDITY

20~95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40~+80℃, 10~95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0~60℃)

VIBRATION

10~500 Hz, 5G 12min./1cycle, period for 72min. each along X,Y,Z axes

SAFETY& EMC

SAFETY STANDARDS

UL8750(type”HL”)(except for BE-type),CSA C22.2 No. 250.13-12; IEC/EN/AS/NZS 61347-1,IEC/EN/AS/NZS 61347-2-13 independent, EN62384,BIS IS15885(for 12/12B/12DA/24/24B/24DA/36A/42/42A/48A/54 only), EAC TP TC 004,GB19510.1, GB19510.14; IP65 or IP67; KC61347-1, KC61347-2-13 approved

DALI STANDARDS

Compliance to IEC62386-101,102,207 for DA-Type only

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/ 500VDC / 25℃/ 70%RH

EMC EMISSION

Compliance to EN55015, EN61000-3-2 ClassC(@load ≧ 60%); EN61000-3-3; GB17743 , GB17625.1 , EAC TPTC020 ; KCKN15 ,KN61547

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11 ; EN61547 , light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV),EAC TP TC020 ; KC KN 15,KN 61547

OTHERS

MTBF

899.8K hrs min. Telcordia SR-332 (Bellcore) 313.66 Khrs min.MIL-HDBK-217F(25℃)

DIMENSION

219*63-35.5mm (L*W*H)

PACKING

0.95Kg ; 16pcs/16.0kg/0.77CUFT