How to Solve IP Camera No Link Issue on PoE NVR

How to Solve IP Camera No Link Issue on PoE NVR

IP cameras could be added into PoE NVR with both Manual mode and Plug- and- Play mode.

 

When applying the Plug- and- Play mode, please kindly make sure it is Hikvision brand camera, and the password of the camera is the same as the NVR. For “No Link” issue, please enter NVR.

 

Menu - Camera - IP Camera, click Status icon of camera to check the error message first.

Scenario 1:

The user name or the password is wrong.

Solution :

If the IP camera has hard reset button, please turn off the camera (cut off the power). Then keep holding the button for more than 30 seconds. Meanwhile, power on the camera while holding the button. The device would be back to the inactive status. PoE NVR will automatically active and connect the camera.

 

If the IP camera doesn’t have hard reset button, please use SADP tool to reset camera password first. You can operate according to below steps:

 

1. Download and install the latest SADP tool on your computer. You can download from below link: https://www.hikvision.com/en/support/tools/hitools/TS20200826033/

2. Connect your computer to one of PoE ports of NVR with network cable.

3. Running SADP tool to search camera.

4. Select the device, and click the “forgot password” button.

5. If it has an export button, you can click it to export a device’s xml file and send it to our regional support team to reset password. 

6. Get import file from support team, then import file to reset device password.

(Note: Please set the new password of camera to the same as NVR’s.)

7. PoE NVR will automatically connect the cameras with same password.

Scenario 2:

Network is Unreachable

 

Solution:

If the camera is connected to NVR PoE port. 

 

1. Please download and install the latest SADP tool on your computer. You can download from below link: https://www.hikvision.com/en/support/tools/hitools/TS20200826033/

2. Connect your computer to one of PoE ports of NVR with network cable .

3. Running SADP tool to search camera, check device IP address.

4. Please access camera via web browser as following picture.

5. Go to Configuration - Maintenance - Default, default camera to factory settings, PoE NVR will automatically active and connect camera.

If the camera is connected to the PoE switch, please connect switch to NVR LAN port. The IP address of the camera must be in the same network segment as the IPv4 address of NVR. Then enter NVR Menu- Camera- IP Camera, select camera and click Edit icon.

Select Adding mode to Manual, enter camera IP address and correct password, then click OK to add camera.

Scenario 3:

IP camera does not exist

 

Solution:

“IP camera does not exist” means NVR does not detect the camera input.

Please check whether the camera is properly connected to the POE port of the NVR. You can try to change a shorter cable, change a PoE port or connect a external power supply to IP camera to test.

Ten serwis korzysta z plików cookies. Są one stosowane w celu zapamiętywania prywatnych ustawień użytkownika, oraz wygodniejszego i płynniejszego użytkowania portalu. Korzystając z serwisu wyrażasz zgodę na używanie cookies. Ustawienia te mogą być zmienione w każdej chwili w opcjach przeglądarki.  Polityka Plików Cookie i Polityka Prywatności.

Skontaktuj się z nami
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.