DS-3E1505P-EI

4 Port Gigabit Smart POE Switch

  • 4 × Gigabit PoE port,1 × Gigabit RJ45 port
  • Total PoE Power Budget 60W
  • Support 802.1Q VLAN
  • Support PoE watchdog to detect and restart the cameras that do not respond
  • Support STP/RSTP Loop prevention
  • Support cable detection to locate failure
  • Up to 300 m Long Range PoE Transmission
  • 6KV Surge Protection
View Less
View more

Available models:

DS-3E1505P-EI

Especificación

  • General
  • CarcasaMetal material
  • Peso neto0.26 kg (0.573 lb)
  • Peso bruto0.75 kg (1.65 lb)
  • Dimensiones (W x H x D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
  • Temperatura de funcionamiento0 °C to 40 °C (32 °F to 104 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación54VDC, 1.2A
  • Modo de instalaciónDesk-Mounted,Wall-Mounted
  • Max. El consumo de energía65 W
  • Consumo de energía en inactivo0.9 W
  • Surge Protection6 KV
  • Parámetros de red
  • Puertos4 × Gigabit PoE port,1 × Gigabit RJ45 port
  • Tabla de direcciones MAC2 K
  • Capacidad de conmutación10 Gbps
  • Tasa de reenvío de paquetes7.44 Mpps
  • Caché interna1 Mbits
  • Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoEEnd-span: 1/2(-), 3/6(+)
  • Puerto PoEPoE: Ports 1 to 4
  • Max. Puerto de alimentación30 W
  • PoE Power Budget60 W
  • Función de software
  • Largo alcancePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • Certificaciones
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • Seguridad CE-LVD (EN 62368-1: 2014+A11: 2017),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)
  • QuímicaCE-RoHS (2011/65/EU),Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU)

Especificación

Especificación
General
  • CarcasaMetal material
  • Peso neto0.26 kg (0.573 lb)
  • Peso bruto0.75 kg (1.65 lb)
  • Dimensiones (W x H x D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
  • Temperatura de funcionamiento0 °C to 40 °C (32 °F to 104 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación54VDC, 1.2A
  • Modo de instalaciónDesk-Mounted,Wall-Mounted
  • Max. El consumo de energía65 W
  • Consumo de energía en inactivo0.9 W
  • Surge Protection6 KV
Parámetros de red
  • Puertos4 × Gigabit PoE port,1 × Gigabit RJ45 port
  • Tabla de direcciones MAC2 K
  • Capacidad de conmutación10 Gbps
  • Tasa de reenvío de paquetes7.44 Mpps
  • Caché interna1 Mbits
Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoEEnd-span: 1/2(-), 3/6(+)
  • Puerto PoEPoE: Ports 1 to 4
  • Max. Puerto de alimentación30 W
  • PoE Power Budget60 W
Función de software
  • Largo alcancePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
Certificaciones
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • Seguridad CE-LVD (EN 62368-1: 2014+A11: 2017),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)
  • QuímicaCE-RoHS (2011/65/EU),Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU)

Resources

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Aplicado a:
DS-3E1505P-EI

Hikvision.com/mx/ utiliza cookies estrictamente necesarias y tecnologías relacionadas para permitir que el sitio web funcione. Con tu consentimiento, también nos gustaría utilizar cookies para observar y analizar los niveles de tráfico y otras métricas / mostrarte publicidad dirigida / mostrarte publicidad de acuerdo con tu ubicación / adaptar el contenido de nuestro sitio web. Para obtener más información sobre las prácticas de cookies, consulta nuestra política de cookies.

Contáctenos
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.