Rain Shield of Module Door Station

  • Adapts to two-module surface mounting with protective shield.

Specification
  • General
  • Working temperature-40° C to +60° C (-40° F to 140° F)
  • Working humidity10% to 95%
  • 500g
  • Dimension (W × H × D)224x 116.4×58 mm (8.82" x 4.58" x 2.28")
  • Installation1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is placed leveled via measuring with the gradienter. Chisel 4 holes with drill align to the screw holes on the sticker. The suggested size of hole is 6 (diameter) × 25 (depth) mm. 2. Remove the sticker and insert the expansion sleeves into the screw holes. Fix the mounting frame and protective shield onto the wall with 4 expansion bolts. Thread the module-connecting line across the thread hole of the frame. Pass the main unit connecting lines across the thread hole to the upper grid. Connect the cables and module-connecting line to the corresponding interfaces of the main unit, then place the main unit into the upper grid. Connect the other end of the module-connecting line to the input interface of the sub module. Organize the line with cable tie in the package. 3. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid. 4. Use the hexagon wrench in the package fix the cover onto the frame.
  • MaterialSECC
Specification
Download Center
Download Center

이 웹사이트는 웹사이트가 정상적으로 작동 할 수 있도록 필요한 쿠키를 사용합니다. 당사 웹사이트에서 최상의 경험을 제공하기 위해 추가 쿠키를 사용하고자 합니다. 더 많은 정보를 위해 쿠키 정책을 확인하세요.

문의하기