NEW

8 Port Gigabit Smart POE Switch

  • 8 × Gigabit PoE port,2 × Gigabit RJ45 port
  • Total PoE Power Budget 110W
  • Support 802.1Q VLAN
  • Support PoE watchdog to detect and restart the cameras that do not respond
  • Support STP/RSTP Loop prevention
  • Support cable detection to locate failure
  • Up to 300 m Long Range PoE Transmission
  • 6KV Surge Protection
View Less
View more

Available models:

DS-3E1510P-EI

Specification

  • General
  • Dimensions (W × H × D)217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Installation ModeDesk-Mounted,Wall-Mounted
  • Gross Weight1.27 kg (2.8 lb)
  • Net Weight0.54 kg (1.19 lb)
  • Power Consumption in Idle2.7 W
  • ShellMetal material
  • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Power Supply54VDC, 2.22A
  • Max. Power Consumption120 W
  • Relative Humidity5% to 95% (no condensation)
  • Surge Protection6 KV
  • Network Parameters
  • Pelabuhan8 × Gigabit PoE port,2 × Gigabit RJ45 port
  • MAC Address Table4 K
  • Switching Capacity20 Gbps
  • Packet Forwarding Rate14.88 Mpps
  • Internal Cache1.5 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(-), 3/6(+)
  • PoE PortPoE: Ports 1 to 8
  • Max. Port Power30 W
  • PoE Power Budget110 W
  • Software Function
  • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 3 aggregation groups.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • Approval
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Specification

Specification
General
  • Dimensions (W × H × D)217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Installation ModeDesk-Mounted,Wall-Mounted
  • Gross Weight1.27 kg (2.8 lb)
  • Net Weight0.54 kg (1.19 lb)
  • Power Consumption in Idle2.7 W
  • ShellMetal material
  • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Power Supply54VDC, 2.22A
  • Max. Power Consumption120 W
  • Relative Humidity5% to 95% (no condensation)
  • Surge Protection6 KV
Network Parameters
  • Pelabuhan8 × Gigabit PoE port,2 × Gigabit RJ45 port
  • MAC Address Table4 K
  • Switching Capacity20 Gbps
  • Packet Forwarding Rate14.88 Mpps
  • Internal Cache1.5 Mbits
PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(-), 3/6(+)
  • PoE PortPoE: Ports 1 to 8
  • Max. Port Power30 W
  • PoE Power Budget110 W
Software Function
  • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 3 aggregation groups.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
Approval
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Firmware

Applied to:
DS-3E1510P-EI
For better user experience, we highly recommend you to update your device to the latest firmware asap.

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics / show you targeted advertising / show you advertising on the basis of your location / tailor our website's content. For more information on cookie practices please refer to our cookie policy.

 

Hubungi Kami
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro
back to top

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.