This website uses cookies to store info on your device. Cookies help our website work normally and show us how we can improve your user experience.
By continuing to browse the site you are agreeing to our cookie policy and privacy policy.

Power Supply Unit

  • 150W single output power supply for industrial PoE switch
  • Input: 100-305 VAC/142-431 VDC
  • Output: 48 VDC, 3.13 A
  • IP65 rating protection
  • Wide operating temperature: -40℃ to +90℃ for outdoor use.
Specification
  • ELG-150-48
  • DC VOLTAGE48V
  • CONSTANT CURRENT REGION24~48V
  • RATED CURRENT(for BE Type only)2.8A
  • RATED POWERFor all the Types:100VAC~180VAC,105W;Except for BE Type:200VAC,150.2W;For BE type only:200VAC~305VAC,134.4W
  • RIPPLE & NOISE250mVp-p
  • VOLTAGE ADJ. RANGEAdjustable for A/AB-Type only (via the built-in potentiometer),43.2~52.8V
  • CURRENT ADJ. RANGEAdjustable for A/AB-Type only (via the built-in potentiometer),1.56~3.13A
  • VOLTAGE TOLERANCE±2.0%
  • LINE REGULATION±0.5%
  • LOAD REGULATION±0.5%
  • AUXILIARY DC OUTPUTNominal 15V(DEVIATION 11.5~15.5V)@0.3A for BE-Type only
  • SETUP,RISE TIME1600ms,80ms/115VAC 500ms,100ms/230VAC
  • HOLD UP TIME(Typ.)10ms/115VAC,230VAC
  • RATED CURRENT3.13A
  • FREQUENCY RANGE47~63Hz
  • POWER FACTORPF≥0.97/115VAC,PF≥0.95/230VAC,PF≥0.92/277VAC@full load
  • TOTAL HARMONIC DISTORTIONTHD<20%(@load≥50%/115VAC;@load≥60%/230VAC;@load≥75%/277VAC)
  • EFFICIENCY(Typ.)90%
  • EFFICIENCY(Typ.)(for BE Type only)88%
  • AC CURRENT1.7A/115VAC 0.9A/230VAC 0.7A/277VAC
  • INRUSH CURRENT(Typ.)COLD START 65A(twidth=550μs measured at 50% lpeak) at 230VAC;Per NEMA 410
  • MAX.No.of PSUs on 16A CIRCUIT BREAKER3 units (circuit breaker of type B)/6 units (circuit breaker of type C) at 230VAC
  • LEAKAGE CURRENT<0.75mA / 277VAC
  • NO LOAD/STANDBY POWER CONSUMPTIONNo load power consumption <0.5W for Blank / A /Dx /D2-Type;Standby power consumption <0.5W for B /AB /DA-Type
  • VOLTAGE RANGE100~305VAC 142~431VDC
  • SHORT CIRCUITHiccup mode,recovers automatically after fault condition is removed
  • OVER VOLTAGE54~62V;Shut down output voltage,re-power on to recover
  • OVER TEMPERATUREShut down output voltage,re-power on to recover
  • WORKING TEMPTcase=-40~+90℃
  • MAX.CASE TEMPTcase=+90℃
  • WORKING HUMIDITY20~95% RH non-condensing
  • STORAGE TEMP,HUMIDITY-40~+80℃,10~95% RH
  • TEMP.COEFFICIENT±0.03%/℃ (0~60℃)
  • VIBRATION10~500Hz,5G 12min./1cycle,period for 72min.each along X,Y,Z axes
  • SAFETY STANDARDSUL8750(type"HL")(except for BE-type),CSA C22.2 NO. 250.13-12;IEC/EN/AS/NZS 61347-1,IC/EN/AS/NZS 61347-2-13 independent;EN62384,BIS IS 15885(for 12/12B/12DA/24/24B/24DA/36A/42/42A/48A/54 only);EAC TP TC 004,GB19510.1,GB19510.14;IP65 or IP67;KC61347-1,KC61347-2-13 approved
  • DALI STANDARDSCompliance to IEC62386~101,102,207 for DA-Type only
  • WITHSTAND VOLTAGEI/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
  • ISOLATION RESISTANCEI/P-O/P,I/P-FG,O/P-FG:100M Ohms /500VDC /25℃ /75% RH
  • EMC EMISSIONCompliance to EN55015,EN61000-3-2 ClassC(@load ≥ 60%);EN61000-3-3;GB17743,GB17625,EACTP020;KCKN15,KN61547
  • EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11;EN61547,light industry level(surge immunity Line-earth 6KV,Line-Line 4KV),EAC TP TC 020;KC KN15;KN61547
  • MTBF899.8K hrs min.Telcordia SR-332 (Bellcore) 313.66Khrs min. MIL-HDBK-217F(25℃)
  • DIMENSION219*63*35.5mm (L*W*H)
  • PACKING0.95Kg;16pcs/16.0kg/0.77CUFT
  • OVER CURRENT95~108%;Constant current limiting,recovers automatically after fault condition is removed
Specification
Download Center