24 Port Fast Ethernet Smart POE Switch

  • 24 × 100 Mbps PoE RJ45 ports, 2 × gigabit combos.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.

Available models:

DS-3E1326P-EI

Specification

  • Network Parameters
  • Kikötők 24 × 10/100 Mbps PoE port,2 × 1 Gbps combo
  • Port TypeRJ45 port,full duplex,MDIMDI-X adaptive
  • StandardIEEE 802.3,IEEE 802.3u,IEEE 802.3x,IEEE 802.3ab,IEEE 802.3z
  • High Priority PortsPorts 1 to 8
  • Forwarding ModeStore-and-forward switching
  • Working ModeStandard mode (default),Extend mode
  • MAC Address Table16 K
  • Switching Capacity8.8 Gbps
  • Packet Forwarding Rate6.5472 Mpps
  • Internal Cache4 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(-), 3/6(+) Mid-span: 4/5(+), 7/8(-) 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 24
  • Max. Port Power30 W
  • PoE Power Budget370 W
  • Software Function
  • Device MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, and basic network parameter configuration.
  • PoE ConfigurationSupport port rate configuration, flow control, and ports enabling.
  • General
  • ShellMetal material, fan-free design
  • Net Weight2.83 kg (6.24 lb)
  • Gross Weight3.800 kg (8.38 lb)
  • Dimensions (W × H × D)440.00 mm × 44.00 mm × 221.00 mm (17.32'' × 1.73'' × 8.70'')
  • Operating Temperature-10 °C to 55 °C (14 °F to 131 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100-240 VAC, 50/60 Hz, Max. 6.5 A
  • Max. Power Consumption400 W
  • Approval
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 55024: 2010 +A1: 2015); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016)
  • SafetyUL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013)
  • ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)

Specification

Firmware
Applied to:
DS-3E1326P-EI
*For better user experience, we highly recommend you to update your device to the latest firmware asap.

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics and tailor our website’s content. For more information on cookie practices please refer to our cookie policy.

Kapcsolat
back to top