2.4Ghz 300Mbps 100m Elevator Wireless CPE

  • Up to 100 m wireless transmission distance
  • Special design for CCTV scenario with smooth video transmission
  • Easy configuration through web interface
  • Dual power supply mode options makes installation more flexible
  • Signal indicator helps to find the best installation position and direction
  • 300 Mbps 802.11n wireless
  • Built-in 8 dBi 2 × 2 MIMO Antenna
  • Ideal solution for elevator connection
Specification
  • Général
  • Net Weight0.69 kg
  • InstallationPole
  • Wireless
  • StandardIEEE802.11 b/g/n
  • Operation Frequency2412 to 2472 MHz(Note:Available channel may vary depending on local regulations)
  • AntennaInternal, Gain 8dBi, H: 60° V: 30°
  • Max Output Power20dBm (Note:Maximum output power may vary in different channels depending on local regulations)
  • Receive sensitivity-92±1.5 dBm@1 Mbps, -72±1.5 dBm@ MSC7
  • Max transmission Rate300 Mbps
  • LED FIGWF
  • Gross weight0.77 kg
  • Hardware
  • Power Supply12 V/1 A passive PoE or 12 V/1 A DC
  • Interface10/100 M Base-TX × 1
  • Operation temperature-30°C ~ 55°C (-22°F ~131°F)
  • Storage temperature-30°C ~ 70°C (-22°F ~158°F)
  • Operation humidity10% - 90% RH (non-condensing)
  • Dimensions193.5mm × 80mm × 67.5mm
  • Software
  • EncryptionWPA-PSK/WPA2-PSK
  • SécuritéIP/MAC filter, SSID hidden
  • Network ProtocolTCP/UDP/ARP/ICMP/HTTP/NTP
  • Management and LogsNTP, Syslog, SNMP
  • Web based configurationSupported
  • Firmware UpdateSupport update firmware by Web page
  • Bandwidth20M/40MHz
  • Unmanaged PoE L2 Series
  • Max.power consumption2.8 W
Specification