Temperature Screening Self Check Terminal

  • Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration
  • Supports Vanadium Oxide uncooled sensor to measure target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
  • Recognition distance: 0.3 to 2 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
  • Displays temperature measurement results on the authentication page
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Integrated design with stand bracket
  • Communicates with the third-party turnstile via IO output or Wiegand
  • Adjustable supplement light brightness
  • High performance processor with deep learning algorithm
  • 50,000 face capacity and 100,000 event capacity
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • Transmits and saves the comparison results and the captured pictures to the client software or others
  • NTP, manually time synchronization, and auto synchronization
  • Watchdog design for protecting the device and ensuring device running properly
  • Audio prompt for authentication result
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
Specification
  • Temperature measurement
  • Temperature range30 °C to 45 °C (86 °F to 113 °F)
  • SensorVanadium Oxide uncooled sensor
  • Résolution120 × 160
  • Fréquence d'image25 fps
  • Measurement accuracy0.1 °C
  • Measurement deviation± 0.5 °C, without black body calibration
  • Measuring distance0.3 to 2 m
  • Ecran
  • Taille10.1-inch
  • TypeTouch screen
  • Camera
  • Pixel2 MP
  • ObjectifDual-lens
  • Network
  • Wired networkSupport, 10/100/1000 Mbps self-adaptive
  • Interface
  • Network interface1
  • Lock output1
  • Exit button1
  • Door contact input1
  • Fonction
  • Face anti-spoofingSupport
  • Audio promptSupport
  • Autres
  • Working temperature0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Working humidity10 to 90% (No condensing)
  • Application environmentIndoor and windless environment use only
Specification
Download Center