Ce site web utilise des cookies pour stocker des informations sur votre appareil. Les cookies aident notre site web à fonctionner normalement et nous montrent comment nous pouvons améliorer votre expérience utilisateur.
En poursuivant votre navigation sur le site, vous acceptez nos politique relative aux cookies et politique de confidentialité.

Nous Contacter

MinMoe Temperature Screening Terminal

  • Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration
  • Supports Vanadium Oxide uncooled sensor to measure target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
  • Recognition distance: 0.3 to 2 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
  • Displays temperature measurement results on the authentication page
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Integrated design with stand bracket
  • Communicates with the third-party turnstile via IO output or Wiegand
  • Adjustable supplement light brightness
  • High performance processor with deep learning algorithm
  • 50,000 face capacity and 100,000 event capacity
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • Transmits and saves the comparison results and the captured pictures to the client software or others
  • NTP, manually time synchronization, and auto synchronization
  • Watchdog design for protecting the device and ensuring device running properly
  • Audio prompt for authentication result
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
Specification
  • Temperature measurement
  • Temperature range30 °C to 45 °C (86 °F to 113 °F)
  • SensorVanadium Oxide uncooled sensor
  • Resolution120 × 160
  • Frame rate25 fps
  • Measurement accuracy0.1 °C
  • Measurement deviation± 0.5 °C, without black body calibration
  • Measuring distance0.3 to 2 m
  • Screen
  • Size10.1-inch
  • TypeTouch screen
  • Camera
  • Pixel2 MP
  • LensDual-lens
  • Network
  • Wired networkSupport, 10/100/1000 Mbps self-adaptive
  • Interface
  • Network interface1
  • Lock output1
  • Exit button1
  • Door contact input1
  • Function
  • Face anti-spoofingSupport
  • Audio promptSupport
  • Others
  • Working temperature0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Working humidity10 to 90% (No condensing)
  • Application environmentIndoor and windless environment use only
Specification