Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

DS-3E1552P-SI

48 Port Gigabit Smart POE Switch

IEEE 802.3af/at PoE standard
48 x Gigabit PoE Ports, 2 × gigabit RJ45, 2 x fiber optical ports
Total PoE Power Budget 470W
PoE Watchdog, STP/RSTP, VLAN, SNMP, QoS
104 Gbps Switching Capacity
16 K MAC Address Entries

View Less

Available models:

DS-3E1552P-SI

General
CarcasaMetal material
Peso neto4.35 kg (9.59 lb)
Peso bruto4.5 kg (9.92 lb)
Dimensiones (W x H x D)440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')
Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad5% to 95% (no condensation)
Humedad relativa5% to 95% (no condensation)
Fuente de alimentación100 to 240 VAC, 50/60 Hz, Max. 5 A
Modo de instalaciónRack (equipped with mounting ears)
Max. El consumo de energía500 W
Consumo de energía en inactivo30 W
Surge Protection6 KV

Parámetros de red
Puertos48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
Tabla de direcciones MAC16 K
Capacidad de conmutación104 Gbps
Tasa de reenvío de paquetes77.38 Mpps
Caché interna12 Mbits

Fuente de alimentación PoE
PoE StandardIEEE 802.3af,IEEE 802.3at
Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Puerto PoEPoE: Ports 1 to 48
Max. Puerto de alimentación30 W
PoE Power Budget470 W

Función de software
Largo alcancePorts 1 to 48: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 48: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 48: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Certificaciones
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SeguridadCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Especificación

General

Carcasa

Metal material

Peso neto

4.35 kg (9.59 lb)

Peso bruto

4.5 kg (9.92 lb)

Dimensiones (W x H x D)

440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')

Temperatura de funcionamiento

0 °C to 45 °C (0 °F to 113 °F)

Temperatura de almacenamiento

-40 °C to 85 °C (-40 °F to 185 °F)

Condiciones de humedad

5% to 95% (no condensation)

Humedad relativa

5% to 95% (no condensation)

Fuente de alimentación

100 to 240 VAC, 50/60 Hz, Max. 5 A

Modo de instalación

Rack (equipped with mounting ears)

Max. El consumo de energía

500 W

Consumo de energía en inactivo

30 W

Surge Protection

6 KV

Parámetros de red

Puertos

48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port

Tabla de direcciones MAC

16 K

Capacidad de conmutación

104 Gbps

Tasa de reenvío de paquetes

77.38 Mpps

Caché interna

12 Mbits

Fuente de alimentación PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at

Pin de alimentación PoE

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

Puerto PoE

PoE: Ports 1 to 48

Max. Puerto de alimentación

30 W

PoE Power Budget

470 W

Función de software

Largo alcance

Ports 1 to 48: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 48: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 48: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.

System Maintenance

Support remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Certificaciones

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)

Seguridad

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Química

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

General

CarcasaMetal material
Peso neto4.35 kg (9.59 lb)
Peso bruto4.5 kg (9.92 lb)
Dimensiones (W x H x D)440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')
Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad5% to 95% (no condensation)
Humedad relativa5% to 95% (no condensation)
Fuente de alimentación100 to 240 VAC, 50/60 Hz, Max. 5 A
Modo de instalaciónRack (equipped with mounting ears)
Max. El consumo de energía500 W
Consumo de energía en inactivo30 W
Surge Protection6 KV

Parámetros de red

Puertos48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
Tabla de direcciones MAC16 K
Capacidad de conmutación104 Gbps
Tasa de reenvío de paquetes77.38 Mpps
Caché interna12 Mbits

Fuente de alimentación PoE

PoE StandardIEEE 802.3af,IEEE 802.3at
Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Puerto PoEPoE: Ports 1 to 48
Max. Puerto de alimentación30 W
PoE Power Budget470 W

Función de software

Largo alcancePorts 1 to 48: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 48: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 48: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Certificaciones

EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SeguridadCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)