Single Input Transmitter

  • Small size design, which can be put into wired detector easily
  • 433MHz two-way wireless communication
  • LED display, show the real status of device
  • With one tamper input and one PGM, can be used as zone input or alarm outpout
  • With 3.3v voltage output, can be used to power up external wired detector
  • Detection of device removal by accelerometer

Especificación
  • Hardware features
  • Puerto Serial1
  • Power switch1
  • Entrada de alarma1 Alarm, 1 Tamper
  • Salida de alarma1 PGM, AM/Output
  • 3.3v Output1, up to 10mA
  • Electrical characteristics
  • Fuente de alimentación3 CR123
  • Operation humidity10%~90%
  • Operation temperature–10℃ ~ 55℃
  • Consumo de energíaQuiescent current: 40.29 uA Max current: 47.85mA Voltage: 3 VDC
  • Battery life spanMore than 5 years (report alarm 50 times per day)
  • Wireless transmission
  • RF frequency433MHz
  • RF methodTwo-way communication
  • RF modulation2GFSK
  • RF distance1300m
  • pantalla
  • indicador3: Alarm/Tamper(Red), Fault(Amber), Signal Strength(Green/Red)
  • General
  • Installation methodPut inside Wireless Ready Detector
  • Dimension(WxHxD)102*41*20mm
  • 35g(Without Battery), 90g(With Battery)
Especificación
Contáctenos