Global

Global - English

Asia

Europa

Oceanía

ANZ - English

América Latina

North America

Middle East and Africa

HOT

16 Port Gigabit Smart POE Switch

16 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
IEEE 802.3at/af standard for PoE ports.
Network topology management, alarm push, network health monitor.
6 KV surge protection for PoE ports.
AF/AT camera can reach up to 300 m in extend mode.
PoE watchdog to auto detect and restart the cameras that do not respond.
Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

View Less

Ficha Técnica

Modelos disponibles:

DS-3E1518P-SI

HOT

Especificación
Resources
Accesorios

Ficha Técnica

General
CarcasaMetal material
Peso neto2.735 kg (6.03 lb)
Peso bruto3.31 kg (7.30 lb)
Dimensiones (W x H x D)440 mm × 44 mm × 220.8 mm (17.32” × 1.73” × 8.69”)
Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad5% to 95% (no condensation)
Humedad relativa5% to 95% (no condensation)
Fuente de alimentación100 to 240 VAC, 50/60 Hz, Max. 4 A
Modo de instalaciónRack (equipped with mounting ears)
Max. El consumo de energía250 W
Consumo de energía en inactivo25 W
Surge Protection6 KV surge protection for PoE ports.

Parámetros de red
Puertos16 × Gigabit PoE port,2 × Gigabit fiber optical port
Tabla de direcciones MAC8 K
Capacidad de conmutación56 Gbps
Tasa de reenvío de paquetes41.66 Mpps
Caché interna4.1 Mbits

Fuente de alimentación PoE
PoE StandardIEEE 802.3af,IEEE 802.3at
Pin de alimentación PoEEnd-span: 1/2(+), 3/6(-);
Puerto PoEPoE: Ports 1 to 16
Max. Puerto de alimentación30 W
PoE Power Budget225 W

Función de software
Largo alcancePorts 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
System MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Certificaciones
EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

General

Carcasa

Metal material

Peso neto

2.735 kg (6.03 lb)

Peso bruto

3.31 kg (7.30 lb)

Dimensiones (W x H x D)

440 mm × 44 mm × 220.8 mm (17.32” × 1.73” × 8.69”)

Temperatura de funcionamiento

0 °C to 45 °C (0 °F to 113 °F)

Temperatura de almacenamiento

-40 °C to 85 °C (-40 °F to 185 °F)

Condiciones de humedad

5% to 95% (no condensation)

Humedad relativa

5% to 95% (no condensation)

Fuente de alimentación

100 to 240 VAC, 50/60 Hz, Max. 4 A

Modo de instalación

Rack (equipped with mounting ears)

Max. El consumo de energía

250 W

Consumo de energía en inactivo

25 W

Surge Protection

6 KV surge protection for PoE ports.

Parámetros de red

Puertos

16 × Gigabit PoE port,2 × Gigabit fiber optical port

Tabla de direcciones MAC

8 K

Capacidad de conmutación

56 Gbps

Tasa de reenvío de paquetes

41.66 Mpps

Caché interna

4.1 Mbits

Fuente de alimentación PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at

Pin de alimentación PoE

End-span: 1/2(+), 3/6(-);

Puerto PoE

PoE: Ports 1 to 16

Max. Puerto de alimentación

30 W

PoE Power Budget

225 W

Función de software

Largo alcance

Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 16: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.

System Maintenance

Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Certificaciones

EMC

FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)

Seguridad

UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Química

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

General

CarcasaMetal material
Peso neto2.735 kg (6.03 lb)
Peso bruto3.31 kg (7.30 lb)
Dimensiones (W x H x D)440 mm × 44 mm × 220.8 mm (17.32” × 1.73” × 8.69”)
Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad5% to 95% (no condensation)
Humedad relativa5% to 95% (no condensation)
Fuente de alimentación100 to 240 VAC, 50/60 Hz, Max. 4 A
Modo de instalaciónRack (equipped with mounting ears)
Max. El consumo de energía250 W
Consumo de energía en inactivo25 W
Surge Protection6 KV surge protection for PoE ports.

Parámetros de red

Puertos16 × Gigabit PoE port,2 × Gigabit fiber optical port
Tabla de direcciones MAC8 K
Capacidad de conmutación56 Gbps
Tasa de reenvío de paquetes41.66 Mpps
Caché interna4.1 Mbits

Fuente de alimentación PoE

PoE StandardIEEE 802.3af,IEEE 802.3at
Pin de alimentación PoEEnd-span: 1/2(+), 3/6(-);
Puerto PoEPoE: Ports 1 to 16
Max. Puerto de alimentación30 W
PoE Power Budget225 W

Función de software

Largo alcancePorts 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
System MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Certificaciones

EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)