8 Port Fast Ethernet Smart POE Switch

  • 8 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.
View Less
View more

Modelos disponibles:

DS-3E1310P-SI
DS-3E1310P-SI

Especificación

  • General
  • CarcasaMetal material
  • Peso neto1.72 kg (3.79 lb)
  • Peso bruto2.20 kg (4.85 lb)
  • Dimensiones (W x H x D)266.00 mm × 44.50 mm × 220.80 mm (10.47'' × 1.75'' × 8.69'')
  • Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación100-240 VAC, 50/60 Hz, Max. 1.5 A
  • Modo de instalaciónRack (equipped with mounting ears)
  • Max. El consumo de energía150 W
  • Consumo de energía en inactivo5 W
  • Surge Protection6 KV
  • Parámetros de red
  • Puertos8 × 10/100 Mbps PoE port,2 × Gigabit combo
  • Tabla de direcciones MAC16 K
  • Capacidad de conmutación9.2 Gbps
  • Tasa de reenvío de paquetes6.84 Mpps
  • Caché interna4 Mbits
  • Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • Puerto PoEPoE: Ports 1 to 8
  • Max. Puerto de alimentación30 W
  • PoE Power Budget125 W
  • Función de software
  • Largo alcancePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1  to 8: auto detect and restart the cameras that do not respond.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
  • Certificaciones
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Especificación

Especificación
General
  • CarcasaMetal material
  • Peso neto1.72 kg (3.79 lb)
  • Peso bruto2.20 kg (4.85 lb)
  • Dimensiones (W x H x D)266.00 mm × 44.50 mm × 220.80 mm (10.47'' × 1.75'' × 8.69'')
  • Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación100-240 VAC, 50/60 Hz, Max. 1.5 A
  • Modo de instalaciónRack (equipped with mounting ears)
  • Max. El consumo de energía150 W
  • Consumo de energía en inactivo5 W
  • Surge Protection6 KV
Parámetros de red
  • Puertos8 × 10/100 Mbps PoE port,2 × Gigabit combo
  • Tabla de direcciones MAC16 K
  • Capacidad de conmutación9.2 Gbps
  • Tasa de reenvío de paquetes6.84 Mpps
  • Caché interna4 Mbits
Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • Puerto PoEPoE: Ports 1 to 8
  • Max. Puerto de alimentación30 W
  • PoE Power Budget125 W
Función de software
  • Largo alcancePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1  to 8: auto detect and restart the cameras that do not respond.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
Certificaciones
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Resources

Technical documents

Para una mejor experiencia de usuario, le recomendamos encarecidamente que actualice su dispositivo al más reciente firmware lo antes posible.
Aplicado a:
DS-3E1310P-SI
Aplicado a:
DS-3E1310P-SI

Hikvision.com/es-la/ utiliza cookies estrictamente necesarias y tecnologías relacionadas para permitir que el sitio web funcione. Con su consentimiento, también nos gustaría utilizar cookies para observar y analizar los niveles de tráfico y otras métricas / mostrarle publicidad dirigida / mostrarle publicidad de acuerdo con su ubicación / adaptar el contenido de nuestro sitio web. Para obtener más información sobre las prácticas de cookies, consulte nuestra política de cookies.

Contáctenos
Hik-Partner Pro close
Hik-Partner Pro
Tu herramienta aliada Lee más
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.