Global

Global - English

Asia

Europa

Oceanía

ANZ - English

América Latina

North America

Middle East and Africa

DS-3E1106HP-EI

4 Port Fast Ethernet Smart POE Switch

4 × 100 Mbps PoE RJ45 ports, 2 × 100 Mbps network RJ45 ports
IEEE 802.3at/af/bt standard for PoE ports
Network topology management, and alarm push
6 KV surge protection for PoE ports
Up to 300 m long-range transmission
AF/AT camera can reach up to 300 m in extend mode

View Less

Modelos disponibles:

DS-3E1106HP-EI

General
CarcasaMetal material, IP40
Peso neto0.245 kg (0.54 lb)
Peso bruto0.645 kg (1.42 lb)
Dimensiones (W x H x D)145.0 mm × 25.6 mm × 68.45 mm (5.7" × 1.0" × 2.69")
Temperatura de funcionamiento0 °C to 40 °C (32 °F to 104 °F)
Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad5% to 95% (no condensation)
Humedad relativa5% to 95% (no condensation)
Fuente de alimentación48 VDC, 1.35 A
Modo de instalaciónDesk-Mounted,Wall-Mounted
Max. El consumo de energía65 W
Consumo de energía en inactivo2 W
Surge Protection6 KV

Parámetros de red
Puertos4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
Tabla de direcciones MAC2 K
Capacidad de conmutación1.2 Gbps
Tasa de reenvío de paquetes0.90 Mpps
Caché interna768 Kbits

Fuente de alimentación PoE
PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Puerto PoEHi-PoE: Port 1 PoE: Ports 2 to 4
Max. Puerto de alimentación60 W,30 W
PoE Power Budget60 W

Función de software
Largo alcancePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Port Isolation/
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
Link Aggregation/
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
QoS/
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.
Loop Prevention/
VLAN/
Port Rate-Limiting/
IGMP Snooping/
ACL/
IPSG/

Certificaciones
EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Especificación

General

Carcasa

Metal material, IP40

Peso neto

0.245 kg (0.54 lb)

Peso bruto

0.645 kg (1.42 lb)

Dimensiones (W x H x D)

145.0 mm × 25.6 mm × 68.45 mm (5.7" × 1.0" × 2.69")

Temperatura de funcionamiento

0 °C to 40 °C (32 °F to 104 °F)

Temperatura de almacenamiento

-40 °C to 85 °C (-40 °F to 185 °F)

Condiciones de humedad

5% to 95% (no condensation)

Humedad relativa

5% to 95% (no condensation)

Fuente de alimentación

48 VDC, 1.35 A

Modo de instalación

Desk-Mounted,Wall-Mounted

Max. El consumo de energía

65 W

Consumo de energía en inactivo

2 W

Surge Protection

6 KV

Parámetros de red

Puertos

4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port

Tabla de direcciones MAC

2 K

Capacidad de conmutación

1.2 Gbps

Tasa de reenvío de paquetes

0.90 Mpps

Caché interna

768 Kbits

Fuente de alimentación PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt

Pin de alimentación PoE

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

Puerto PoE

Hi-PoE: Port 1 PoE: Ports 2 to 4

Max. Puerto de alimentación

60 W,30 W

PoE Power Budget

60 W

Función de software

Largo alcance

Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.

VIP Port

Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.

PoE Watchdog

Ports 1 to 4: auto detect and restart the cameras that do not respond.

Port Isolation

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

Link Aggregation

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

QoS

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.

Loop Prevention

VLAN

Port Rate-Limiting

IGMP Snooping

ACL

IPSG

Certificaciones

EMC

FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)

Seguridad

UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Química

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

General

CarcasaMetal material, IP40
Peso neto0.245 kg (0.54 lb)
Peso bruto0.645 kg (1.42 lb)
Dimensiones (W x H x D)145.0 mm × 25.6 mm × 68.45 mm (5.7" × 1.0" × 2.69")
Temperatura de funcionamiento0 °C to 40 °C (32 °F to 104 °F)
Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad5% to 95% (no condensation)
Humedad relativa5% to 95% (no condensation)
Fuente de alimentación48 VDC, 1.35 A
Modo de instalaciónDesk-Mounted,Wall-Mounted
Max. El consumo de energía65 W
Consumo de energía en inactivo2 W
Surge Protection6 KV

Parámetros de red

Puertos4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
Tabla de direcciones MAC2 K
Capacidad de conmutación1.2 Gbps
Tasa de reenvío de paquetes0.90 Mpps
Caché interna768 Kbits

Fuente de alimentación PoE

PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Puerto PoEHi-PoE: Port 1 PoE: Ports 2 to 4
Max. Puerto de alimentación60 W,30 W
PoE Power Budget60 W

Función de software

Largo alcancePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Port Isolation/
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
Link Aggregation/
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
QoS/
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.
Loop Prevention/
VLAN/
Port Rate-Limiting/
IGMP Snooping/
ACL/
IPSG/

Certificaciones

EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)