Face Recognition Module For Turnstile

  • Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration
  • Supports Vanadium Oxide uncooled sensor to measure target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
  • Recognition distance: 0.3 to 2 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
  • Displays temperature measurement results on the authentication page
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Integrated design with stand bracket
  • Communicates with the third-party turnstile via IO output or Wiegand
  • Adjustable supplement light brightness
  • High performance processor with deep learning algorithm
  • 50,000 face capacity and 100,000 event capacity
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • Transmits and saves the comparison results and the captured pictures to the client software or others
  • NTP, manually time synchronization, and auto synchronization
  • Watchdog design for protecting the device and ensuring device running properly
  • Audio prompt for authentication result
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

Especificación
  • Medida de temperatura
  • Rango de temperatura30 °C to 45 °C (86 °F to 113 °F)
  • SensorVanadium Oxide uncooled sensor
  • Resolución120 × 160
  • Frame Rate25 fps
  • Precisión de la medición0.1 °C
  • Desviación de medida± 0.5 °C, without black body calibration
  • Distancia de medición0.3 to 2 m
  • Pantalla
  • Tamaño10.1-inch
  • TipoTouch screen
  • Cámara
  • Pixel2 MP
  • LenteDual-lens
  • Red
  • Red cableadaSupport, 10/100/1000 Mbps self-adaptive
  • Interfaz
  • Interfaz de red1
  • Salida de cerradura1
  • Botón de salida1
  • Entrada de contacto de puerta1
  • Función
  • Face anti-spoofingSupport
  • Mensaje de audioSupport
  • Otros
  • Temperatura de trabajo0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Humedad de trabajo10 to 90% (No condensing)
  • Entorno de aplicaciónIndoor and windless environment use only
Especificación

This website uses cookies to store info on your device. Cookies help our website work normally and show us how we can improve your user experience.
By continuing to browse the site you are agreeing to our cookie policy and privacy policy.

Contáctenos