Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

48 Port Gigabit Smart POE Switch

IEEE 802.3af/at PoE standard
48 x Gigabit PoE Ports, 2 × gigabit RJ45, 2 x fiber optical ports
Total PoE Power Budget 470W
PoE Watchdog, STP/RSTP, VLAN, SNMP, QoS
104 Gbps Switching Capacity
16 K MAC Address Entries

View Less

Data Sheet

Available models:

DS-3E1552P-SI

Specifikace
Resources
Příslušenství

Data Sheet

Všeobecné
KrytMetal material
Čistá hmotnost4.35 kg (9.59 lb)
Celková hmotnost4.5 kg (9.92 lb)
Rozměry (Š × V × H)440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')
Provozní teplota0 °C to 45 °C (0 °F to 113 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení100 to 240 VAC, 50/60 Hz, Max. 5 A
Režim instalaceRack (equipped with mounting ears)
Max. Spotřeba energie500 W
Spotřeba energie v nečinnosti30 W
Surge Protection6 KV

Síťové parametry
Přístavy48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
Tabulka adres MAC16 K
Spínací kapacita104 Gbps
Rychlost předávání paketů77.38 Mpps
Interní mezipaměť12 Mbits

Napájení PoE
PoE StandardIEEE 802.3af,IEEE 802.3at
PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 48
Max. Napájení portu30 W
Rozpočet napájení PoE470 W

Funkce softwaru
Dlouhý dosahPorts 1 to 48: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 48: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 48: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Schválení
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Všeobecné

Kryt

Metal material

Čistá hmotnost

4.35 kg (9.59 lb)

Celková hmotnost

4.5 kg (9.92 lb)

Rozměry (Š × V × H)

440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')

Provozní teplota

0 °C to 45 °C (0 °F to 113 °F)

Skladovací teplota

-40 °C to 85 °C (-40 °F to 185 °F)

Provozní vlhkost

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Zdroj napájení

100 to 240 VAC, 50/60 Hz, Max. 5 A

Režim instalace

Rack (equipped with mounting ears)

Max. Spotřeba energie

500 W

Spotřeba energie v nečinnosti

30 W

Surge Protection

6 KV

Síťové parametry

Přístavy

48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port

Tabulka adres MAC

16 K

Spínací kapacita

104 Gbps

Rychlost předávání paketů

77.38 Mpps

Interní mezipaměť

12 Mbits

Napájení PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at

PoE napájecí kolík

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Port

PoE: Ports 1 to 48

Max. Napájení portu

30 W

Rozpočet napájení PoE

470 W

Funkce softwaru

Dlouhý dosah

Ports 1 to 48: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 48: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 48: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.

System Maintenance

Support remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Schválení

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)

Bezpečnost

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemie

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Všeobecné

KrytMetal material
Čistá hmotnost4.35 kg (9.59 lb)
Celková hmotnost4.5 kg (9.92 lb)
Rozměry (Š × V × H)440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')
Provozní teplota0 °C to 45 °C (0 °F to 113 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení100 to 240 VAC, 50/60 Hz, Max. 5 A
Režim instalaceRack (equipped with mounting ears)
Max. Spotřeba energie500 W
Spotřeba energie v nečinnosti30 W
Surge Protection6 KV

Síťové parametry

Přístavy48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
Tabulka adres MAC16 K
Spínací kapacita104 Gbps
Rychlost předávání paketů77.38 Mpps
Interní mezipaměť12 Mbits

Napájení PoE

PoE StandardIEEE 802.3af,IEEE 802.3at
PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 48
Max. Napájení portu30 W
Rozpočet napájení PoE470 W

Funkce softwaru

Dlouhý dosahPorts 1 to 48: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 48: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 48: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Schválení

EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)