Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

24 Port Gigabit Smart POE Switch

24 × Gigabit PoE port,4 × Gigabit fiber optical port
Total PoE power budget 370 W
Support DHCP snooping
Support 802.1Q VLAN
Support ACL List
Support STP/ERPS loop prevention, storm control
Support ARP Anti-Spoofing
Support SNMP, QoS
6 kV surge protection

View Less

Data Sheet

Available models:

DS-3E1528P-SI-24P4F

Specifikace
Resources
Příslušenství

Data Sheet

Všeobecné
KrytMetal material
Čistá hmotnost2.8 kg (6.17 lb)
Celková hmotnost3.46 kg (7.63 lb)
Rozměry (Š × V × H)440 mm × 44 mm × 220.8 mm (17.32”× 1.73”× 8.69'')
Provozní teplota0°C to 45°C (0 °F to 113 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení100-240 V,50/60 Hz,6.3 A Max
Režim instalaceRack (equipped with mounting ears)
Max. Spotřeba energie400 W
Spotřeba energie v nečinnosti10 W
Surge Protection6 kV

Síťové parametry
Přístavy24 × Gigabit PoE port,4 × Gigabit fiber optical port
Tabulka adres MAC8 K
Spínací kapacita56 Gbps
Rychlost předávání paketů41.66 Mpps
Interní mezipaměť4.1 Mbits

Napájení PoE
PoE StandardIEEE 802.3af,IEEE 802.3at
PoE napájecí kolíkEnd-span: 1/2(-), 3/6(+)
PoE PortPoE: Ports 1 to 24
Max. Napájení portu30 W

Funkce softwaru
Port IsolationPorts 1 to 28: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
ACLPort security strategy. Support up to 64 ACL entries. Support up to 128 configuration rules under all ACL entries.
IPSGIPSG can control the security of port access device. Support port, MAC, IP binding. Support 256 security table entries.

Schválení
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Všeobecné

Kryt

Metal material

Čistá hmotnost

2.8 kg (6.17 lb)

Celková hmotnost

3.46 kg (7.63 lb)

Rozměry (Š × V × H)

440 mm × 44 mm × 220.8 mm (17.32”× 1.73”× 8.69'')

Provozní teplota

0°C to 45°C (0 °F to 113 °F)

Skladovací teplota

-40 °C to 85 °C (-40 °F to 185 °F)

Provozní vlhkost

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Zdroj napájení

100-240 V,50/60 Hz,6.3 A Max

Režim instalace

Rack (equipped with mounting ears)

Max. Spotřeba energie

400 W

Spotřeba energie v nečinnosti

10 W

Surge Protection

6 kV

Síťové parametry

Přístavy

24 × Gigabit PoE port,4 × Gigabit fiber optical port

Tabulka adres MAC

8 K

Spínací kapacita

56 Gbps

Rychlost předávání paketů

41.66 Mpps

Interní mezipaměť

4.1 Mbits

Napájení PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at

PoE napájecí kolík

End-span: 1/2(-), 3/6(+)

PoE Port

PoE: Ports 1 to 24

Max. Napájení portu

30 W

Funkce softwaru

Port Isolation

Ports 1 to 28: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

ACL

Port security strategy. Support up to 64 ACL entries. Support up to 128 configuration rules under all ACL entries.

IPSG

IPSG can control the security of port access device. Support port, MAC, IP binding. Support 256 security table entries.

Schválení

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)

Bezpečnost

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemie

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Všeobecné

KrytMetal material
Čistá hmotnost2.8 kg (6.17 lb)
Celková hmotnost3.46 kg (7.63 lb)
Rozměry (Š × V × H)440 mm × 44 mm × 220.8 mm (17.32”× 1.73”× 8.69'')
Provozní teplota0°C to 45°C (0 °F to 113 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení100-240 V,50/60 Hz,6.3 A Max
Režim instalaceRack (equipped with mounting ears)
Max. Spotřeba energie400 W
Spotřeba energie v nečinnosti10 W
Surge Protection6 kV

Síťové parametry

Přístavy24 × Gigabit PoE port,4 × Gigabit fiber optical port
Tabulka adres MAC8 K
Spínací kapacita56 Gbps
Rychlost předávání paketů41.66 Mpps
Interní mezipaměť4.1 Mbits

Napájení PoE

PoE StandardIEEE 802.3af,IEEE 802.3at
PoE napájecí kolíkEnd-span: 1/2(-), 3/6(+)
PoE PortPoE: Ports 1 to 24
Max. Napájení portu30 W

Funkce softwaru

Port IsolationPorts 1 to 28: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
ACLPort security strategy. Support up to 64 ACL entries. Support up to 128 configuration rules under all ACL entries.
IPSGIPSG can control the security of port access device. Support port, MAC, IP binding. Support 256 security table entries.

Schválení

EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)