DS-3E1505P-EI/M
Data Sheet

Specifikace

  • Všeobecné
  • KrytMetal material
  • Čistá hmotnost0.26 kg (0.573 lb)
  • Celková hmotnost0.75 kg (1.65 lb)
  • Rozměry (Š × V × H)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
  • Provozní teplota0 °C to 40 °C (32 °F to 104 °F)
  • Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
  • Provozní vlhkost5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Zdroj napájení54VDC, 0.92A
  • Režim instalaceDesk-Mounted,Wall-Mounted
  • Max. Spotřeba energie50 W
  • Spotřeba energie v nečinnosti1 W
  • Surge Protection6 KV
  • Síťové parametry
  • Přístavy4 × Gigabit PoE port,1 × Gigabit RJ45 port
  • Tabulka adres MAC2 K
  • Spínací kapacita10 Gbps
  • Rychlost předávání paketů7.44 Mpps
  • Interní mezipaměť1 Mbits
  • Napájení PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE napájecí kolíkEnd-span: 1/2(-), 3/6(+)
  • PoE PortPoE: Ports 1 to 4
  • Max. Napájení portu30 W
  • Rozpočet napájení PoE45 W
  • Funkce softwaru
  • Dlouhý dosahPorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • Schválení
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Specifikace

Všeobecné
Kryt
Metal material
Čistá hmotnost
0.26 kg (0.573 lb)
Celková hmotnost
0.75 kg (1.65 lb)
Rozměry (Š × V × H)
121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
Provozní teplota
0 °C to 40 °C (32 °F to 104 °F)
Skladovací teplota
-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Zdroj napájení
54VDC, 0.92A
Režim instalace
Desk-Mounted,Wall-Mounted
Max. Spotřeba energie
50 W
Spotřeba energie v nečinnosti
1 W
Surge Protection
6 KV
Síťové parametry
Přístavy
4 × Gigabit PoE port,1 × Gigabit RJ45 port
Tabulka adres MAC
2 K
Spínací kapacita
10 Gbps
Rychlost předávání paketů
7.44 Mpps
Interní mezipaměť
1 Mbits
Napájení PoE
PoE Standard
IEEE 802.3af,IEEE 802.3at
PoE napájecí kolík
End-span: 1/2(-), 3/6(+)
PoE Port
PoE: Ports 1 to 4
Max. Napájení portu
30 W
Rozpočet napájení PoE
45 W
Funkce softwaru
Dlouhý dosah
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 4: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLAN
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System Maintenance
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
Schválení
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Bezpečnost
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemie
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Specifikace
Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
Schválení
  • Schválení
  • Schválení
  • Schválení
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

Technical documents

Firmware

For better user experience, we highly recommend you to update your device to the latest firmware asap.

Firmware

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Firmware_V3.0.13_241120
Aplikováno na:
DS-3E1505P-EI/M