24 Port Fast Ethernet Smart POE Switch

  • 24 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.
View Less
View more

Available models:

DS-3E1326P-EI/M

Specifikace

  • Všeobecné
  • KrytMetal material
  • Čistá hmotnost2.13 kg (4.70 lb)
  • Celková hmotnost3.1 kg (6.8 lb),3.0 kg (6.6 lb)
  • Rozměry (Š × V × H)335.00 mm × 44.50 mm × 226.00 mm (13.19'' × 1.75'' × 8.90'')
  • Provozní teplota0 °C to 45 °C (0 °F to 113 °F)
  • Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
  • Provozní vlhkost5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Zdroj napájení100-240 VAC, 50/60 Hz, Max. 6.5 A
  • Režim instalaceRack (equipped with mounting ears)
  • Max. Spotřeba energie250 W
  • Spotřeba energie v nečinnosti10 W
  • Surge Protection6 KV
  • Síťové parametry
  • Přístavy24 × 10/100 Mbps PoE port,2 × Gigabit combo
  • Tabulka adres MAC16 K
  • Spínací kapacita14.8 Gbps
  • Rychlost předávání paketů11.01 Mpps
  • Interní mezipaměť4 Mbits
  • Napájení PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 24
  • Max. Napájení portu30 W
  • Rozpočet napájení PoE230 W
  • Funkce softwaru
  • Dlouhý dosahPorts 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
  • System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, and basic network parameter configuration.
  • Schválení
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • BezpečnostUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Specifikace

Specifikace
Všeobecné
  • KrytMetal material
  • Čistá hmotnost2.13 kg (4.70 lb)
  • Celková hmotnost3.1 kg (6.8 lb),3.0 kg (6.6 lb)
  • Rozměry (Š × V × H)335.00 mm × 44.50 mm × 226.00 mm (13.19'' × 1.75'' × 8.90'')
  • Provozní teplota0 °C to 45 °C (0 °F to 113 °F)
  • Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
  • Provozní vlhkost5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Zdroj napájení100-240 VAC, 50/60 Hz, Max. 6.5 A
  • Režim instalaceRack (equipped with mounting ears)
  • Max. Spotřeba energie250 W
  • Spotřeba energie v nečinnosti10 W
  • Surge Protection6 KV
Síťové parametry
  • Přístavy24 × 10/100 Mbps PoE port,2 × Gigabit combo
  • Tabulka adres MAC16 K
  • Spínací kapacita14.8 Gbps
  • Rychlost předávání paketů11.01 Mpps
  • Interní mezipaměť4 Mbits
Napájení PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 24
  • Max. Napájení portu30 W
  • Rozpočet napájení PoE230 W
Funkce softwaru
  • Dlouhý dosahPorts 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
  • System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, and basic network parameter configuration.
Schválení
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • BezpečnostUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics and tailor our website’s content. For more information on cookie practices please refer to our cookie policy.

Kontakt
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Hik-Partner Pro
Hik-Partner Pro
back to top

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.