Global

Global - English

Asia

Europe

Oceania

ANZ - English

Latin America

North America

Middle East and Africa

DS-3E1106HP-EI

4 Port Fast Ethernet Smart POE Switch

4 × 100 Mbps PoE RJ45 ports, 2 × 100 Mbps network RJ45 ports
IEEE 802.3at/af/bt standard for PoE ports
Network topology management, and alarm push
6 KV surge protection for PoE ports
Up to 300 m long-range transmission
AF/AT camera can reach up to 300 m in extend mode

View Less

Available models:

DS-3E1106HP-EI

Všeobecné
KrytMetal material, IP40
Čistá hmotnost0.245 kg (0.54 lb)
Celková hmotnost0.645 kg (1.42 lb)
Rozměry (Š × V × H)145.0 mm × 25.6 mm × 68.45 mm (5.7" × 1.0" × 2.69")
Provozní teplota0 °C to 40 °C (32 °F to 104 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení48 VDC, 1.35 A
Režim instalaceDesk-Mounted,Wall-Mounted
Max. Spotřeba energie65 W
Spotřeba energie v nečinnosti2 W
Surge Protection6 KV

Síťové parametry
Přístavy4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
Tabulka adres MAC2 K
Spínací kapacita1.2 Gbps
Rychlost předávání paketů0.90 Mpps
Interní mezipaměť768 Kbits

Napájení PoE
PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortHi-PoE: Port 1 PoE: Ports 2 to 4
Max. Napájení portu60 W,30 W
Rozpočet napájení PoE60 W

Funkce softwaru
Dlouhý dosahPorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Port Isolation/
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
Link Aggregation/
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
QoS/
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.
Loop Prevention/
VLAN/
Port Rate-Limiting/
IGMP Snooping/
ACL/
IPSG/

Schválení
EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
BezpečnostUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Specifikace

Všeobecné

Kryt

Metal material, IP40

Čistá hmotnost

0.245 kg (0.54 lb)

Celková hmotnost

0.645 kg (1.42 lb)

Rozměry (Š × V × H)

145.0 mm × 25.6 mm × 68.45 mm (5.7" × 1.0" × 2.69")

Provozní teplota

0 °C to 40 °C (32 °F to 104 °F)

Skladovací teplota

-40 °C to 85 °C (-40 °F to 185 °F)

Provozní vlhkost

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Zdroj napájení

48 VDC, 1.35 A

Režim instalace

Desk-Mounted,Wall-Mounted

Max. Spotřeba energie

65 W

Spotřeba energie v nečinnosti

2 W

Surge Protection

6 KV

Síťové parametry

Přístavy

4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port

Tabulka adres MAC

2 K

Spínací kapacita

1.2 Gbps

Rychlost předávání paketů

0.90 Mpps

Interní mezipaměť

768 Kbits

Napájení PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt

PoE napájecí kolík

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Port

Hi-PoE: Port 1 PoE: Ports 2 to 4

Max. Napájení portu

60 W,30 W

Rozpočet napájení PoE

60 W

Funkce softwaru

Dlouhý dosah

Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.

VIP Port

Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.

PoE Watchdog

Ports 1 to 4: auto detect and restart the cameras that do not respond.

Port Isolation

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

Link Aggregation

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

QoS

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.

Loop Prevention

VLAN

Port Rate-Limiting

IGMP Snooping

ACL

IPSG

Schválení

EMC

FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)

Bezpečnost

UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Chemie

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Všeobecné

KrytMetal material, IP40
Čistá hmotnost0.245 kg (0.54 lb)
Celková hmotnost0.645 kg (1.42 lb)
Rozměry (Š × V × H)145.0 mm × 25.6 mm × 68.45 mm (5.7" × 1.0" × 2.69")
Provozní teplota0 °C to 40 °C (32 °F to 104 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení48 VDC, 1.35 A
Režim instalaceDesk-Mounted,Wall-Mounted
Max. Spotřeba energie65 W
Spotřeba energie v nečinnosti2 W
Surge Protection6 KV

Síťové parametry

Přístavy4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
Tabulka adres MAC2 K
Spínací kapacita1.2 Gbps
Rychlost předávání paketů0.90 Mpps
Interní mezipaměť768 Kbits

Napájení PoE

PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortHi-PoE: Port 1 PoE: Ports 2 to 4
Max. Napájení portu60 W,30 W
Rozpočet napájení PoE60 W

Funkce softwaru

Dlouhý dosahPorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Port Isolation/
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
Link Aggregation/
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
QoS/
Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.
Loop Prevention/
VLAN/
Port Rate-Limiting/
IGMP Snooping/
ACL/
IPSG/

Schválení

EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
BezpečnostUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)