DS-3T1506HP-EI-UPS NEW
Data Sheet

Specifikace

  • Všeobecné
  • Čistá hmotnost0.7 kg (1.54 lb)
  • Celková hmotnost1.16 kg (2.56 lb)
  • Rozměry (Š × V × H)158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'')
  • Provozní teplota-40 °C to 75 °C (-40 °F to 167 °F)
  • Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
  • Provozní vlhkost5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Zdroj napájení12V DC, 10A or 24V DC, 5A; 54V 2.22A
  • Režim instalaceDesk-Mounted,Rail,Wall-Mounted
  • Max. Spotřeba energie120 W
  • Spotřeba energie v nečinnosti2 W
  • Surge Protection6 kV
  • KrytMetal material, IP30
  • Síťové parametry
  • Přístavy4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port
  • Tabulka adres MAC2 K
  • Spínací kapacitaWhole-Device Performance: 14 Gbps Port Performance: 12 Gbps
  • Rychlost předávání paketůWhole-Device Performance: 10.42 Mpps Port Performance: 8.93 Mpps
  • Interní mezipaměť1 Mbits
  • Napájení PoE
  • PoE StandardPort 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings
  • PoE napájecí kolíkPort 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Port 2: End-span: 1/2(-), 3/6(+) Ports 3 to 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output
  • PoE PortHi-PoE: Port 1 PoE: Ports 2 to 4
  • Max. Napájení portuPort 1: 90 W Ports 2 to 4: 30 W
  • Rozpočet napájení PoEDC 54 V input: 110 W DC 12 V~24 V input: 60 W
  • Funkce softwaru
  • Dlouhý dosahPorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 6: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s).
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
  • DDM (Digital Diagnostic Monitoring)Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.
  • Schválení
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
  • BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Specifikace

Všeobecné
Čistá hmotnost
0.7 kg (1.54 lb)
Celková hmotnost
1.16 kg (2.56 lb)
Rozměry (Š × V × H)
158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'')
Provozní teplota
-40 °C to 75 °C (-40 °F to 167 °F)
Skladovací teplota
-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Zdroj napájení
12V DC, 10A or 24V DC, 5A; 54V 2.22A
Režim instalace
Desk-Mounted,Rail,Wall-Mounted
Max. Spotřeba energie
120 W
Spotřeba energie v nečinnosti
2 W
Surge Protection
6 kV
Kryt
Metal material, IP30
Síťové parametry
Přístavy
4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port
Tabulka adres MAC
2 K
Spínací kapacita
Whole-Device Performance: 14 Gbps Port Performance: 12 Gbps
Rychlost předávání paketů
Whole-Device Performance: 10.42 Mpps Port Performance: 8.93 Mpps
Interní mezipaměť
1 Mbits
Napájení PoE
PoE Standard
Port 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings
PoE napájecí kolík
Port 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Port 2: End-span: 1/2(-), 3/6(+) Ports 3 to 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output
PoE Port
Hi-PoE: Port 1 PoE: Ports 2 to 4
Max. Napájení portu
Port 1: 90 W Ports 2 to 4: 30 W
Rozpočet napájení PoE
DC 54 V input: 110 W DC 12 V~24 V input: 60 W
Funkce softwaru
Dlouhý dosah
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 6: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 4: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s).
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS.
VLAN
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System Maintenance
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
DDM (Digital Diagnostic Monitoring)
Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.
Schválení
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Bezpečnost
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemie
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Specifikace
Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
Schválení
  • Schválení
  • Schválení
  • Schválení
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

Technical documents

Firmware

For better user experience, we highly recommend you to update your device to the latest firmware asap.

Firmware

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Firmware_V3.0.8_250224
Aplikováno na:
DS-3T1506HP-EI-UPS