DS-3T1306P-SI/HS
Data Sheet

Specifikace

  • Všeobecné
  • KrytMetal material
  • Čistá hmotnost0.4 kg (0.8 lb)
  • Celková hmotnost1.0 kg (2.2 lb)
  • Rozměry (Š × V × H)158.00 mm × 101.20 mm × 31.60 mm (6.20'' × 3.90'' × 1.20'')
  • Provozní teplota-30 °C to 65 °C (-22 °F to 149 °F)
  • Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
  • Provozní vlhkost5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Zdroj napájení48VDC, 1.36A
  • Režim instalaceDesk-Mounted,Rail
  • Max. Spotřeba energie65 W
  • Spotřeba energie v nečinnosti5 W
  • Surge Protection6 kV
  • Síťové parametry
  • Přístavy4 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
  • Tabulka adres MAC2 K
  • Spínací kapacitaWhole-Device Performance: 14 Gbps Port Performance: 4.8 Gbps
  • Rychlost předávání paketůWhole-Device Performance: 10.42 Mpps Port Performance: 3.57 Mpps
  • Interní mezipaměť1 Mbits
  • Napájení PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 4
  • Max. Napájení portu30 W
  • Rozpočet napájení PoE60 W
  • Funkce softwaru
  • Dlouhý dosahPorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
  • DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
  • Schválení
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Specifikace

Všeobecné
Kryt
Metal material
Čistá hmotnost
0.4 kg (0.8 lb)
Celková hmotnost
1.0 kg (2.2 lb)
Rozměry (Š × V × H)
158.00 mm × 101.20 mm × 31.60 mm (6.20'' × 3.90'' × 1.20'')
Provozní teplota
-30 °C to 65 °C (-22 °F to 149 °F)
Skladovací teplota
-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Zdroj napájení
48VDC, 1.36A
Režim instalace
Desk-Mounted,Rail
Max. Spotřeba energie
65 W
Spotřeba energie v nečinnosti
5 W
Surge Protection
6 kV
Síťové parametry
Přístavy
4 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
Tabulka adres MAC
2 K
Spínací kapacita
Whole-Device Performance: 14 Gbps Port Performance: 4.8 Gbps
Rychlost předávání paketů
Whole-Device Performance: 10.42 Mpps Port Performance: 3.57 Mpps
Interní mezipaměť
1 Mbits
Napájení PoE
PoE Standard
IEEE 802.3af,IEEE 802.3at
PoE napájecí kolík
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 4
Max. Napájení portu
30 W
Rozpočet napájení PoE
60 W
Funkce softwaru
Dlouhý dosah
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 4: auto detect and restart the cameras that do not respond.
QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
VLAN
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
System Maintenance
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
Port Rate-Limiting
Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm Control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
Schválení
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Bezpečnost
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemie
CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Specifikace
Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
  • Všeobecné
Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
  • Síťové parametry
Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
  • Napájení PoE
Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
  • Funkce softwaru
Schválení
  • Schválení
  • Schválení
  • Schválení
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

Technical documents

Firmware

For better user experience, we highly recommend you to update your device to the latest firmware asap.

Firmware

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Firmware_V3.0.5_240704
Aplikováno na:
DS-3T1306P-SI/HS