How To Guide

How to install and debug DS-TMG034 DS-TMG035 radar

You can follow these instructions to:

1. Install and configure DS-TMG035（60G/ 79G）

2. Debug the TMG034 Radar（android/ ios/ PC）

How to install and configure DS-TMG42x

Please follow this article to install and configure DS-TMG42x

UD30852B-A_Baseline_DS-TMG42X-Series-Barrier-Gate_User-Manual_V1.0.0_20231011.pdf

How to install and configure DS-TMG4Bx

Please follow these instructions to install and configure DS-TMG4Bx

How to install and configure DS-TMG52x

You can follow these instructions to:

1. Install TMG520

2. Wire and test TMG52x series barrier with LED light bar

3. Change pole direction or pole length for TMG520

How to configure DS-TCG406-E

Please follow the instructions to configure:

How-to-configure-DS-TCG406-E.pdf

How to configure DS-TCG405-E

Please follow the instructions to configure:

How-to-configure-DS-TCG405-E.pdf

How to Use Attendance Service on HikCentral Connect

Please follow this article to use Attendance Service on HikCentral Connect

How-to-Use-Attendance-Service-on-HikCentral-Connect.pdf

How to Configure VCA of the NVR

There are 3 ways to to configure VCA of the NVR:

1. Video Struturalization.

2. Face capture and recognition.

3. Perimeter protection configuration.

How-to-Configure-VCA-of-the-NVR.pdf

How to add solar camera to NVR via OTAP

Since version 4.63, NVR supports access to solar cameras by OTAP protocol, and realizes the functions of preview, video uploading, video retrieval and power display of solar cameras.

How-to-add-solar-camera-to-NVR-via-OTAP.pdf

Installation & Configuration Guidance for H8 Parking Management Camera

Please follow this article to install and configure the H8 Parking Management Camera.

Installation-%26-Configuration-Guidance-for-H8-Parking-Management-Camera.pdf

How to Configure False Alarm Analysis of 3 Series Semi Self-learning Camera

There are 3 steps to configure false alarm analysis of 3 series semi self-learning camera:

1. Configure events and collect false alarm pictures.

2. Import false alarm pictures.

3. Enable False Alarm Analysis.

How-to-configure-false-alarm-analysis-of-3-series-semi-self-learning-camera.pdf

How to Configure 26 Controller in HCAC for Flatform Fire Alarm Linkage

If you want to 26 series controller trigger the fire alarm interface after linking other access control devices to open the door, you can follow these instructions:

1. Check the equipment arming status.

2. Configuration linkage.

How-to-configure-26-controller-in-HCAC-for-platform-fire-alarm-linkage.pdf

Basic Check of Face Misidentification

For face misidentification, the basic troubleshooting mainly includes checking the firmware, checking the face parameters, and checking the face registration picture. After completing the above basic operations, then let the person to identify and check the recognition effect again. If there are still problems, please collect information according to the attached template .

Basic-check-of-face-Misidentification.pdf

How to Configure the Villa Door Station Using the AP Mode

There are two ways to configure the villa door station using the AP Mode:

1. Enable the AP function on the door station’s Webpage.

2. Entering the AP mode by long-press the call button.

Configure-the-Villa-Door-Station-Using-the-AP-mode.pdf

How to Configure Indoor Station Alarm Output

There are two ways to trigger alarm output of indoor station:

1. Zone alarm :when zone alarm is detected, it will trigger alarm output of indoor station

2. Calling linkage: when door station or other indoor station calls indoor station, it will trigger alarm output

How-to-Configure-Indoor-Station-Alarm-Output.pdf

How to Batch Register Indoor Station to Door Station

1. Add Devices on iVMS-4200

2. Batch register Indoor station to Door station

How-to-Batch-Register-Indoor-Station-to-Door-Station.pdf

How to Configure the Second Lock on Door Station

1. Add Devices on iVMS-4200

2. Add Indoor Station to Door Station

3. Configure the Second lock on the Door Station

How-to-Configure-the-Second-Lock-on-Door-Station.pdf

How to Configure People Counting function for DVR

People Counting is used to calculate the number of people entered or left a certain configured area and form in daily/weekly/monthly/annual reports for analysis.

How-to-Configure-People-Counting-Function-for-DVR.pdf

How to Enable Lite Mode

As for some DVR models which supports Lite Mode, we can enable Lite Mode in the local GUI. I will take how to enable 1080P lite mode as example.

How-to-Enable-Lite-Mode.pdf

How to Recover the DVR Password on Local GUI

This document guide user to recover the password on DVR on local GUI.

How-to-Recover-the-DVR-Password-on-Local-GUI.pdf

How to Control Analog Speed Dome by Pelco-D/P Protocol

1. Connect DVR and Analog PTZ Camera

2. Parameters Configuration

3. Configuration test

How-to-Control-Analog-Speed-Dome-by-Pelco-D-or-Pelco-P-Protocol.pdf

How to Disable Analog Channels to Expand IP Channels

To meet customers’ requirement for connecting analog and IP cameras in different rate, Hikvision Turbo HD DVR provide the function of disabling analog channels to expand IP channels. This document is mainly to introduce how to achieve this function.

Note: 1. Different series device have different abilities of expanding IP channels. You can refer to the file for more details. 2. Disabling one analog channel can expand one IP channels.

How-to-Disable-Analog-Channels-to-Expand-IP-Channels.pdf

How to Use POS Function in DVR Using TCP or UDP

To use POS function, both DVR and POS server should be configured and you can configure DVR locally or via iVMS-4200.

How-to-Use-POS-Function-in-DVR-Using-TCP-or-UDP.pdf

How to Change the Channel Signal Type of GUI4.0 DVR

To use POS function, both DVR and POS server should be configured and you can configure DVR locally or via iVMS-4200.

How-to-Change-the-Channel-Signal-Type-of-GUI4.0-DVR.pdf

How to Use Third Party DDNS Services V3.0

An internet connected device (camera, DVR, NVR) can be configured to be accessed from outside its local network. Using an IP address allocated by the internet provider, the end user is able to connect to this device. Internet services for non-enterprise solutions commonly provide a dynamic IP address to its users. The lack of a static IP address means the user must reconfigure their device connection settings every time a new IP address is allocated. Managing multiple devices will prove difficult if IP addresses are constantly changing. This issue can be solved by using a Dynamic Domain Name System (DDNS) Service. A fixed address is assigned by the DDNS service provider that can be used to connect to the desired device. The device itself must be configured with the DDNS credentials so that it may automatically update the service with the newly allocated IP address. Through this service, devices under dynamic IP addresses can maintain static addresses. Hikvision products support a number of third party DDNS services in addition to HiDDNS/Hik-Connect.

How-to-Use-Third-Party-DDNS-Services-V3.0.pdf

How to Configure Heat Map function for DVR

Heat map is a graphical representation of data represented by colors. The heat map function is usually used to analyze the visit times and dwell time of customers in a configured area.

How to Configure Heat Map function for DVR.pdf

How to Rebuild RAID5 when Degraded

As for RAID 5, if one HDD is broken, the RAID5 will be in degraded mode, and we can rebuild RAID5 to recover data. If there are two HDDs broken, the RAID5 will be offline.

How to rebuild RAID5 when degraded.pdf

How to Add IPSAN to NVR

NVR which supports NFS/iSCSI protocol can add up to 8 * 8T Net HDD including IPSAN or NAS.

Note: This function can be configured in website and local GUI.

How-to-Add-IPSAN-to-NVR.pdf

How to Use HDD Clone Function with eSATA HDD

The HDD Clone function can be used to copy the hard disk of NVR and back up the hard disk data of NVR. You need to log on NVR local GUI, then go to the Maintenance-HDD OperationHDD to configure.

How-to-Use-the-HDD-Clone-function-with-eSATA-HDD.pdf

How to Use Redundancy Record in Group Mode

The customer may have the request to save the video record backup.

Note: This function need more than two hard disks and the redundancy must be used in group mode.

How to use Redundancy Record in Group Mode.pdf

How to Use RAID Function in NVR

Please use the enterprise-class HDDs in HDD Compatible List for RAID function

How-to-Use-RAID-Function-in-NVR.pdf

How to Use NVR POS Function

Currently there are two ways to connect NVR with POS terminals, via network or via serial port. For example: The NVR initiates the connection to the POS server for the POS data communications between POS server camera.

How-to-Use-NVR-POS-Function.pdf

How to Add IP Camera with Custom Protocol

Cust