• Baseline Firmware_PTZ_EN_V5.5.5 180227(DF-ABCD-IX Series PTZ H3)
    • Baseline Firmware_PTZ_EN_V5.5.5 180227(DF-ABCD-IX Series PTZ H3)
    • Support models:

      DS-2DF6A236X-AEL、DS-2DF6A225X-AEL、DS-2DF6225X-AEL、DS-2DF5225X-AEL(3)、DS-2DF5232X-AEL(3)、DS-2DF8425IX-AEL(W)、DS-2DF8436IX-AEL(W)、DS-2DF8436I5X-AEL(W)、DS-2DF6A436X-AEL、DS-2DF6A425X-AEL、DS-2DF8836IX-AEL(W)、DS-2DF8825IX-AEL(W)、DS-2DF8836I5X-AEL(W)、DS-2DF6A836X-AEL、DS-2DF6A825X-AEL

  • Baseline Firmware_PTZ_H3_EN_STD_5.5.3_180228(only for DarkFighterX PTZ)
    • Baseline Firmware_PTZ_H3_EN_STD_5.5.3_180228(only for DarkFighterX PTZ)
    • DarkFighterX_PTZ_Camera_V5.5.3_Release_Note-external.pdf

      updates:

      1.       Newly support Rapid Focus

      2.       Support Brightness Limit fuction in Auto, Day, Night mode.

      3.       Support new Serial No. rules, which use combination of letters and numbers

      4.       Support deep learning algorithm

  • Baseline Firmware_IPC_ML_V5.5.0_170914(4XX6,mobile, anti-corrosion, Explosion-proof, 20x)
    • Baseline Firmware_IPC_ML_V5.5.0_170914(4XX6,mobile, anti-corrosion, Explosion-proof, 20x)
    • Warning: Please note that cameras upgraded to V5.5.0 cannot be downgraded to previous versions. This firmware support Hik-Connect and do not support HiDDNS.

       

      Support models:

      DS-2CD4XX6FWD, DS-2CD65X2, DS-2XM6XX2, DS-2CD6626B-IZHS(R), DS-2XC61X2, DS-2XE6XX2, DS-2CD4A24FWD-IZ(H)(S) (T)(4.7~94mm)

       

      Updates:

      1.  ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security    question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

       

      For more details, please refer to the corresponding release notes.

       

      http://www.hikvision.com/en/faq_81.html

       

       

  • Baseline Firmware_IPC_ML_V5.4.5_170302 (4 Line R4 40X5,4AX5,41X5,45X5,46X5)
    • Baseline Firmware_IPC_ML_V5.4.5_170302 (4 Line R4 40X5,4AX5,41X5,45X5,46X5)
    •  


      Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.

       

      Support models:

      DS-2CD4A35F(WD)-IZ(H)(S), DS-2CD4135F(WD)-IZ, DS-2CD4535F(WD)-IZ(H)(S), DS-2CD4635F(WD)-IZ(H)(S), DS-2CD4A65F-IZ(H)(S), DS-2CD4165F-IZ, DS-2CD4565F-IZ(H), DS-2CD4665F-IZ(H)(S), DS-2CD4A85F-IZ(H)(S), DS-2CD4185F-IZ, DS-2CD4585F-IZ(H), DS-2CD4685F-IZ(H)(S), DS-2CD4AC5F-IZ(H)(S), DS-2CD41C5F-IZ, DS-2CD45C5F-IZ(H), DS-2CD46C5F-IZ(H)(S)


      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.


  • Baseline Firmware_IPC_ML_V5.4.5_170228 (4 Line R1 4XX2FWD,4XX4FWD)
    • Baseline Firmware_IPC_ML_V5.4.5_170228 (4 Line R1 4XX2FWD,4XX4FWD)
    •  

      Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.

       

      Support models:

      DS-2CD4A24FWD-IZ(H)(S), DS-2CD4012F(WD)-(A)(P)(W), DS-2CD4024F(WD)-(A)(P)(W), DS-2CD4032F(WD)-(A)(P)(W), DS-2CD4112F(WD)-(I)(Z)(M), DS-2CD4124F(WD)-(I)(Z)(M), DS-2CD4132FWD-(I)(Z)(M), DS-2CD4212F(WD)-I(Z)(H)(S), DS-2CD4224F-I(Z)(H)(S), DS-2CD4232FWD-I(Z)(H)(S), DS-2CD4312F(WD)-(I)(Z)(H)(S)(PT), DS-2CD4324F(WD)-(I)(Z)(H)(S)(PT), DS-2CD4332FWD-(I)(Z)(H)(S)(PT), DS-2CD4524FWD-I(Z)(H)(M), DS-2CD4624FWD-IZ(H)(S), DS-2CD6412FWD-10, DS-2CD6412FWD-20,DS-2CD6412FWD-30


      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.


  • Baseline Firmware_IPC_G1_EN_STD_5.5.51_180408
    • Baseline Firmware_IPC_G1_EN_STD_5.5.51_180408

    • Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.

       

      Support models:
      DS-2CD2025FWD-I, DS-2CD2025FHWD-I, DS-2CD2035FWD-I, DS-2CD2055FWD-I, DS-2CD2085FWD-I, DS-2CD2125FWD-I(S), DS-2CD2125FHWD-I, DS-2CD2125FWD-IM, DS-2CD2135FWD-I(S), DS-2CD2155FWD-I(S), DS-2CD2185FWD-I, DS-2CD2325FWD-I, DS-2CD2325FHWD-I, DS-2CD2335FWD-I, DS-2CD2355FWD-I, DS-2CD2385FWD-I, DS-2CD2T25FWD-I3/I5/I8, DS-2CD2T25FHWD-I3/I5/I8, DS-2CD2T35FWD-I3/I5/I8, DS-2CD2T55FWD-I3/I5/I8, DS-2CD2T85FWD-I3/I5/I8,DS-2CD2655FWD-IZS,DS-2CD2685FWD-IZS,DS-2CD2755FWD-IZS,DS-2CD2785FWD-IZS,DS-2CD2H55FWD-IZS,DS-2CD2H85FWD-IZS,

       

      Main Updates:

       

      1. ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

      For more details, please refer to the corresponding release notes.

      IPC V5.5.4 G1 Release Note.pdf

       

  • Baseline Firmware_IPC_ML_5.4.5_170216 (29X5FWD)
    • Baseline Firmware_IPC_ML_5.4.5_170216 (29X5FWD)

    • Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.


      Support models:
      DS-2CD2935FWD-I, DS-2CD2935FWD-IS, DS-2CD2955FWD-I, DS-2CD2955FWD-IS


      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.


  • Baseline Firmware_IPC_R6_EN_STD_5.5.5_180111
    • Baseline Firmware_IPC_R6_EN_STD_5.5.5_180111
    •  

      Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.

       

      Support models:
      DS-2CD2F12F-I(W)(S)Z, DS-2CD2412FWD-IW, DS-2CD2F22FWD-I(W)(S), DS-2CD2T22FWD-I3/I5/I8, DS-2CD2022WD-I, DS-2CD2122FWD-I(W)(S), DS-2CD2322WD-I, DS-2CD2422FWD-IW, DS-2CD2522FWD-I(W)(S), DS-2CD2622FWD-I(Z)(S), DS-2CD2722FWD-I(Z)(S), DS-2CD2F42FWD-I(W)(S), DS-2CD2T42WD-I3/I5/I8, DS-2CD2042WD-I, DS-2CD2142FWD-I(W)(S),DS-2CD2342WD-I, DS-2CD2442FWD-IW, DS-2CD2542FWD-I(W)(S), DS-2CD2642FWD-I(Z)(S), DS-2CD2742FWD-I(Z)(S), DS-2CD2F52F-I(S), DS-2CD2T52-I3/I5/I8, DS-2CD2052-I, DS-2CD2152F-I(S), DS-2CD2352-I, DS-2CD2452F-IW, DS-2CD2552F-I(S), DS-2CD2652F-I(Z)(S), DS-2CD2752F-I(Z)(S), DS-2CD1H41WD-IZ

       

      Main Updates:

       

      1. ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

      4. The abnormal binding issue between the DynDNS domain name and IP has been improved.

      For more details, please refer to the corresponding release notes.

      IPC V5.5.5 R6 Release Note.pdf

       

  • Baseline Firmware_IPC_ML_V5.4.5 170123 (Gen1 2 Line 2XX2F)
    • Baseline Firmware_IPC_ML_V5.4.5 170123 (Gen1 2 Line 2XX2F)
    •  

      Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.

       

      Support models:
      DS-2CD2012-I, DS-2CD2012F-I(W), DS-2CD2022-I, DS-2CD2022F-I(W), DS-2CD2032-I, DS-2CD2032F-I(W), DS-2CD2112-(I), DS-2CD2112F-I(W)(S), DS-2CD2122F-I(W), DS-2CD2132-(I), DS-2CD2132F-I(W)(S), DS-2CD2212-I5, DS-2CD2232-I5, DS-2CD2312-I, DS-2CD2332-I, DS-2CD2412F-I(W), DS-2CD2422F-I(W), DS-2CD2432F-I(W), DS-2CD2512F-IB, DS-2CD2532F-I(W)(S), DS-2CD2612F-I(S) , DS-2CD2622F-I(S), DS-2CD2632F-I(S) ,DS-2CD2712F-I(S), DS-2CD2722F-I(S), DS-2CD2732F-I(S), DS-2CD2T12-I3/I5/I8, DS-2CD2T22-I3/I5/I8, DS-2CD2T32-I3/I5/I8, DS-2CD2942F-I(W)(S)

       

      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.

       

       

       

  • Baseline Firmware_IPC_ML_V5.4.5 170124 (Eco 2 line 2E20)
    • Baseline Firmware_IPC_ML_V5.4.5 170124 (Eco 2 line 2E20)
    •  

      Notice: Please note that this firmware does not support HiDDNS. If you use the HiDDNS service, you could convert to our Hik-Connect service which is encluded in this firmware or above version. Before proceeding, make a record of your devices’ IP addresses and ports information, and register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app from the IOS App store/Google Play.

       

      Support models:
      DS-2CD2010-I, DS-2CD2110-I, DS-2CD2210-I3/I5, DS-2CD2310-I, DS-2CD2410FD-I(W), DS-2CD2810F, DS-2CD2510F, DS-2CD2610F-I(S), DS-2CD2710F-I(S), DS-2CD2220-I3/I5, DS-2CD2320-I, DS-2CD2410FD-I(W), DS-2CD2620F-I(S), DS-2CD2720F-I(S), DS-2CD2820F, DS-2CD2C10F-I(W), DS-2CD2D14WD, DS-2CD2Q10FD-IW, DS-2CD2014WD-I, DS-2CD2114WD-I, DS-2CD2520F, DS-2CD2020-I, DS-2CD2120-I, DS-2CD2420-I, DS-2CD2A10F-I, DS-2CD2512F-IB, DS-2CD1010-I, DS-2CD1110-I, DS-2CD1410FD-IW, DS-2CD2110F-I(W)(S), DS-2CD2120F-I(W)(S), DS-2CD2T10-I3(I5), DS-2CD2T20-I3(I5), DS-2CD2E20F-W

       

      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.

       

  • Australian Firmware_Intercom V1.4.72build171228(IVMS included)
    • Australian Firmware_Intercom V1.4.72build171228(IVMS included)
    •  support model:

      Apartment door station: DS-KD8102-V; DS-KD8002-VM

      Villa door station: DS-KV8102-IM,DS-KV8202-IM,DS-KV8402-IM,DS-KB8112

      Indoor station/room station:DS-KH8300-T; DS-KH8301-WT; DS-KH6310

      DS-KH6310-W, DS-KH6310-WL

      Master/concierge  station: DS-KM8301

      Main updates:

      1: Door station’s ring tone changed

      2: Support HIKVISION lift control DS-K2210, DS-K2M0016A

      3: For one button villa door station, it doesn’t require to set up “Dial” setting anymore

      4: To unlock the door via password, need to input “Room NO”+ ”Password”

      HIKVISION INTERCOM 1.4.72 release note.pdf

      How to set up HIVKSIION intercom for first time.pdf

      HIKVISION intercom 1.4.71 release note.pdf

       

       

       

  • Australian Firmware_ANPR camera_V5.4.5_180211
    • Australian Firmware_ANPR camera_V5.4.5_180211
    •  support model:

      DS-2CD4A26FWD-IZ(H)(S)/P;

      DS-2CD4026FWD/P-(H)(IR5)(IRA);

      DS-2CD4526FWD-IZ(H)/P

       

      Bulletin for ANPR camera.pdf

  • Australian Firmware Blazer Express_Client_V1.4.0_20180209
    • Australian Firmware Blazer Express_Client_V1.4.0_20180209
    • It is recommended to exit the watchdog before updating the Blazer Express server

  • Australian Firmware_Blazer Express_V1.4.0_20180209
    • Australian Firmware_Blazer Express_V1.4.0_20180209
    • It is recommended to exit the watchdog before updating the Blazer Express server

  • Baseline Firmware_TVI4.0_DVR_V3.5.50_Build_180124k72