Please be aware that Hikvision products are region-specific and regionally supported. If you have purchased your Hikvision products from an online source or unauthorized distributor, they may not be compatible with the North American region’s firmware and are considered to be “gray market” product. If your camera has “CH” in the serial number, you are most likely using a “gray market” product. Updating the firmware from this site can lead to several complications in those cameras, up to and including camera failure. Restoring a “gray market” product to its original condition is a factory process and will result in a Chinese interface. As Hikvision warranty is void in this case, you must rely on the dealer for any service, support, and warranty of the “gray market” product. If you have any questions or concerns about the official status of your Hikvision distributor, please contact Hikvision USA Customer Service at csr.usa@hikvision.com.
  • Baseline Firmware_NVR (DS-7104/7108NI-SN)_En_STD_V3.0.13build150429(new)
    • Baseline Firmware_NVR (DS-7104/7108NI-SN)_En_STD_V3.0.13build150429(new)
    •  

       Support Models:

       

      DS-7104NI-SN, DS-7104NI-SN/N, DS-7104NI-SN/P, DS-7108NI-SN, DS-7108NI-SN/N, DS-7108NI-SN/P

       

      Updates:

      1. Password creating is required before using the NVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in NVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_DVR (DS-72 73 81 HFHI-ST SL SE)_ML_STD_V3.0.1_build150429(new)
    • Baseline Firmware_DVR (DS-72 73 81 HFHI-ST SL SE)_ML_STD_V3.0.1_build150429(new)
    •  

       Support Models: 

       DS-7204HFHI-SL, DS-7204HFHI-SE, DS-7204HFHI-ST, DS-7208HFHI-SL, DS-7208HFHI-SE, DS-7208HFHI-ST,  DS-7304HFHI-SL,  DS-7304HFHI-ST, DS-7308HFHI-SL,  DS-7308HFHI-ST, DS-7316HFHI-SL,  DS-7316HFHI-ST, DS-8104HFHI-SL,  DS-8104HFHI-ST, DS-8108HFHI-SL,  DS-8108HFHI-ST, DS-8116HFHI-SL,  DS-8116HFHI-ST

       

       Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Fix some bugs;

      5. Other updates.

       

       

  • Baseline Firmware_DS-71_72_73_80_81_9000HQHI(HGHI)-SH_ML_V3.1.6build150427(new)
    • Baseline Firmware_DS-71_72_73_80_81_9000HQHI(HGHI)-SH_ML_V3.1.6build150427(new)
    •  Support Models: 

      DS-7100HGHI-SH, DS-7100HQHI-SH, DS-7200HGHI-SH, DS-7200HQHI-SH, DS-7300HGHI-SH, DS-7300HQHI-SH, DS-8100HGHI-SH, DS-8100HQHI-SH, DS-8000HQHI-SH, DS-90000HQHI-SH

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_DVR (7216/7316HWI-E)_En_V3.1.4_build150430(new)
    • Baseline Firmware_DVR (7216/7316HWI-E)_En_V3.1.4_build150430(new)
    •  Support Models:

      DS-7216HWI-E2, DS-7216HWI-E1, DS-7216HWI-E2/C, DS-7316HWI-E4/C

       

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_DVR (7208/7308HWI-E)_En_V3.1.4_build150430(new)
    • Baseline Firmware_DVR (7208/7308HWI-E)_En_V3.1.4_build150430(new)
    • Support Models:

      DS-7208HWI-E2, DS-7208HWI-E1, DS-7208HWI-E2/C, DS-7308HWI-E4/C

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_DVR (7204/7304HWI-E)_En_V3.1.4_build150430(new)
    • Baseline Firmware_DVR (7204/7304HWI-E)_En_V3.1.4_build150430(new)
    •  Support Models:

      DS-7204HWI-E1, DS-7204HWI-E1/C, DS-7304HWI-E4/C

       

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_24/32-CH DVR_En_V3.1.4_build150430(new)
    • Baseline Firmware_24/32-CH DVR_En_V3.1.4_build150430(new)
    •  Support Models:

      DS-7224HVI-SH, DS-7232HVI-SH, DS-7224HWI-SH, DS-7324HI-SH, DS-7332HI-SH, DS-7324HFI-SH, DS-7332HFI-SH, DS-7324HWI-SH, DS-7332HWI-SH, DS-8124HCI-SH, DS-8132HCI-SH, DS-8124HFSI-SH, DS-8132HFSI-SH, DS-8124HWSI-SH, DS-8132HWSI-SH

       

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_DVR (7216/7316HWI-SH)_En_V3.1.4_build150430(new)
    • Baseline Firmware_DVR (7216/7316HWI-SH)_En_V3.1.4_build150430(new)
    • Support Models:


      DS-7216HFI-SH, DS-7216HWI-SH, DS-7216HWI-SL, DS-7316HFI-SH, DS-7316HWI-SH

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

  • Baseline Firmware_DS-71_72_73_80_81_9000HQHI(HGHI)-SH_ML_V3.3.2build151123(new)
    • Baseline Firmware_DS-71_72_73_80_81_9000HQHI(HGHI)-SH_ML_V3.3.2build151123(new)
    •   Support Models: 

      DS-7100HGHI-SH, DS-7100HQHI-SH, DS-7200HGHI-SH, DS-7200HQHI-SH, DS-7300HGHI-SH, DS-7300HQHI-SH, DS-8100HGHI-SH, DS-8100HQHI-SH, DS-8000HQHI-SH, DS-90000HQHI-SH

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Other updates.

       

       

  • Baseline Firmware_IPD_En_V5.3.2 150519
    • Baseline Firmware_IPD_En_V5.3.2 150519
    •  Support Models:

       DS-2DF8336IV-AEL(W); DS-2DF6336V-AEL; DS-2DF8236IV-AEL(W); DS-2DF6236V-AEL

         

  • Baseline Firmware_DS-76 77 86 96NI-ST XT RT SP_EN_STD_V3.4.0_150929(new)
    • Baseline Firmware_DS-76 77 86 96NI-ST XT RT SP_EN_STD_V3.4.0_150929(new)
    •  

      Support Models:

      DS-7600NI-SP, DS-7600NI-ST, DS-7700NI-SP, DS-7700NI-ST, DS-8600NI-ST, DS-9600NI-ST, DS-9600NI-RT, DS-9600NI-XT

       

      Updates:

      1. Password synchronized to connected Hikvision IPCs when change NVR’s password;

      2. Support H.265 video stream access, storage, remotely live view and playback;

      3. Optimize the password recovery mechanism to make it securer and more convenient;

      4. Support VCA alarm notification on ivms-4500;

      5. Reliable transmission under low-bandwidth condition;

      6. Support zooming for IPCs with motorized lens;

      7. Security enhancement and improvements;

      8. Other bug fixes.

       

  • Baseline_Firmware_DVS_6100HF_HC_EN_STD_V2.0_build90113
    • Baseline_Firmware_DVS_6100HF_HC_EN_STD_V2.0_build90113
    • Support Models:

       DS-6101HFI-IP

       

  • Baseline Firmware_DVR (DS-80 81 90 91 92HFI-ST HWI-ST)_EN_STD_V3.3.1_150423(new)
    • Baseline Firmware_DVR (DS-80 81 90 91 92HFI-ST HWI-ST)_EN_STD_V3.3.1_150423(new)
    •  

      Support Models:

      DS-7208HWI-SV,DS-7216HWI-SV, DS-8004HFI-ST, DS-8004HWI-ST, DS-8008HFI-ST, DS-8008HWI-ST, DS-8016HFI-ST, DS-8016HWI-ST, DS-8104HFI-ST, DS-8104HWI-ST, DS-8108HFI-ST, DS-8108HWI-ST, DS-8116HFI-ST, DS-8116HWI-ST, DS-9004HFI-ST, DS-9004HWI-ST, DS-9004HFI-RT, DS-9008HFI-ST, DS-9008HWI-ST, DS-9008HFI-RT, DS-9016HFI-ST, DS-9016HWI-ST, DS-9016HFI-RT, DS-9016HFI-XT, DS-9104HFI-ST, DS-9104HWI-ST, DS-9104HFI-RT, DS-9108HFI-ST, DS-9108HWI-ST, DS-9108HFI-RT, DS-9116HFI-ST, DS-9116HWI-ST, DS-9116HFI-RT, DS-9116HFI-XT, DS-9204HWI-ST, DS-9208HWI-ST, DS-9216HWI-ST

       

      Updates:

      1. Password creating is required before using the DVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in DVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Fix some small known bugs;

      6. For more details, please refer to our release notes.

      Netra V3.3.1 Release Notes.pdf

       

  • Baseline Firmware_DS-76 77 85 86 95 96NI-ST XT RT SP_EN_STD_V3.3.1_150423
    • Baseline Firmware_DS-76 77 85 86 95 96NI-ST XT RT SP_EN_STD_V3.3.1_150423
    •  

      Support Models:

      DS-7600NI-SP, DS-7600NI-ST, DS-7700NI-SP, DS-7700NI-ST, DS-8600NI-ST, DS-9600NI-ST, DS-9600NI-RT, DS-9600NI-XT

       

      Updates:

      1. Password creating is required before using the NVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in NVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Fix some small known bugs;

      6. For more details, please refer to our release notes.

      Netra V3.3.1 Release Notes.pdf

       

  • Baseline Firmware_NVR (76/77/86NI-E)_En_V3.3.1_build150422
    • Baseline Firmware_NVR (76/77/86NI-E)_En_V3.3.1_build150422
    •  

      Support Models:

      DS-7600NI-E1, DS-7600NI-E2, DS-7600NI-E1/N(P), DS-7600NI-E2/N(P), DS-7700NI-E4, DS-7700NI-E4/N(P),DS-8608/16/32NI-E8

       

      Updates:

      1.Password creating is required before using the NVR (Local GUI menu, web browser, client software and SADP software are optional);

      2. Password strength prompts(Risk,Weak, Medium, Strong) in NVR local GUI menu, web browser, client software and SADP software, and risk password is not permitted;

      3. Lock the remote IP addresses for 30 minutes once login with wrong username or password after several times;

      4. Can not be downgraded to lower firmare version;

      5. Fix some small known bugs;

      6. For more details, please refer to our release notes.

      DS-7600 7700 8600NI-Ex NVR V3.3.1 Release Notes.pdf